2850 - Skoda Heavy Duty Lathes, Conventional Machine Tools and Selection of Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

Engineering

'Description de l''enchère'


All 'Buy Now' prices will reduce before 11am each weekday morning. 

Please Note: Invoices are payable within 24 hours upon receipt.

Please Note: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Nombre de lots par page

Lots 31-40 de 80

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 75: Boring Bar suitable for Horizontal Boring Machines

Boring Bar suitable for Horizontal Boring Machines 200mm x 7m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 76: Boring Bar suitable for Horizontal Boring Machines

Boring Bar suitable for Horizontal Boring Machines 150mm x 5m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 77: (2) x Boring Bars suitable for Horizontal Boring Machines

(2) x Boring Bars suitable for Horizontal Boring Machines 150mm x 3.3m & 90mm x 2.75m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 78: (3) x Boring Bars suitable for Horizontal Boring Machines

(3) x Boring Bars suitable for Horizontal Boring Machines 150mm x 4m, 200mm x 4.4m, 120mm x 2.7m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 79: (3) x Boring Bars suitable for Horizontal Boring Machines

(3) x Boring Bars suitable for Horizontal Boring Machines 100mm x 2.9m, 150mm x 3.1m, 150mm x 5m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 80: (2) x Boring Bars suitable for Horizontal Boring Machines

(2) x Boring Bars suitable for Horizontal Boring Machines 200mm x 7.2m, 140mm x 7.7m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 81: CKD Praha Compressor

CKD Praha Compressor. S/No. 21VK120EKO 1 (1998)

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 800: Sub 8,000kg Twin Beam Overhead Travelling Gantry Crane

Sub 8,000kg Twin Beam Overhead Travelling Gantry Crane, Remote Controlled, Span 18.5m (Approx) 5,000kg Auxiliary Hoist. ID 0223

This lot is subject to a late release and will be available for collection from 31st January 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 801: Vihorlat 8,000kg Twin Beam Overhead Travelling Gantry Crane

Vihorlat 8,000kg Twin Beam Overhead Travelling Gantry Crane, Remote Controlled, Span 18.5m (Approx). ID 0247 (1975)

This lot is subject to a late release and will be available for collection from 31st January 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 802: Vihorlat 5,000kg Twin Beam Overhead Travelling Gantry Crane

Vihorlat 5,000kg Twin Beam Overhead Travelling Gantry Crane, Remote Controlled, Span 18.5m (Approx). ID 0241 (1975)

This lot is subject to a late release and will be available for collection from 31st January 2020

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories