2850 - Skoda Heavy Duty Lathes, Conventional Machine Tools and Selection of Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

Engineering

'Description de l''enchère'


All 'Buy Now' prices will reduce before 11am each weekday morning. 

Please Note: Invoices are payable within 24 hours upon receipt.

Please Note: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Nombre de lots par page

Lots 21-30 de 80

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 46: Qty of ISO 60 Tooling with Racking

Qty of ISO 60 Tooling, ISO 60 Tapping Attachments, Setting Bar, Qty of Pull Studs, Qty of Taps & ISO 60 Setting Tools with Racking

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 49: Boring Bars, 50 ISO Boring Head, Drills & Carbide Tip Holders

Boring Bars, 50 ISO Boring Head, Drills & Carbide Tip Holders

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 51: Cupboard with Qty Morse Taper Drills

Cupboard with Qty Morse Taper Drills, Taps & Cutters

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 53: Qty of ISO 50 Tooling, Drills & Cutting Tools

Qty of ISO 50 Tooling, Drills & Cutting Tools

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 54: Qty of Morse Taper Tooling, Drills, ISO 60 Tooling & ISO 50 Tools

Qty of Morse Taper Tooling, Qty Longseries Morse Taper Drills, ISO 60 Tooling & (4) x ISO 50 Tools 

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 61: ISO 60 Tool Boring Bar Holder

ISO 60 Tool Boring Bar Holder

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 71: (2) x Boring Bars suitable for Horizontal Boring Machines

(2) x Boring Bars suitable for Horizontal Boring Machines

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 72: (4) x Boring Bars suitable for Horizontal Boring Machines

(4) x Boring Bar suitable for Horizontal Boring Machines

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 73: (3) x Boring Bars suitable for Horizontal Boring Machines

(3) x Boring Bars suitable for Horizontal Boring Machines (2) x 100mm x 1.9m, (1) x 90mm x 2.75m

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 74: (4) x Boring Bars suitable for Horizontal Boring Machines

(4) x Boring Bars suitable for Horizontal Boring Machines 

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories