2850 - Skoda Heavy Duty Lathes, Conventional Machine Tools and Selection of Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

Engineering

'Description de l''enchère'


All 'Buy Now' prices will reduce before 11am each weekday morning. 

Please Note: Invoices are payable within 24 hours upon receipt.

Please Note: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Nombre de lots par page

Lots 11-20 de 80

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 23: WTU 315-3 MEZ Brumov Welder

WTU 315-3 MEZ Brumov Welder. S/No. 88-21349

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 24: Welding Bench with Extraction Unit

Welding Bench with Extraction Unit, Table Size 960mm x 790mm x 1940mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 27: Spot Welder

Spot Welder

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 28: Hydraulic 4-Pillar Press

Hydraulic 4-Pillar Press, Table Size 160mm x 175mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 29: Small Hydraulic Press

Small Hydraulic Press, Table Size 630mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 31: Cabinet with Qty of ISO 50 Tooling

Cabinet with Qty of ISO 50 Tooling

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 32: Cupboard with Qty of ISO 50 Tooling and Boring Heads

Cupboard with Qty of ISO 50 Tooling and Boring Heads

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 33: 8 Drawer Cabinet with Qty Tooling & Collet Holders

8 Drawer Cabinet with Qty Tooling & Collet Holders

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 44: Qty of ISO 60 Tooling

Qty of ISO 60 Tooling

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 45: Qty of ISO 60 Tooling with Racking

Qty of ISO 60 Tooling with Racking

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories