2412 - Engineering and Fabrication Machinery Formerly Used by Anlyn Engineering Limited
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Cannock, Cheshire, Sheffield and West Midlands
Please Note: Lot 2B Leadwell V-40L Vertical Machining Centre must be collected on Friday 7th Aug 2015
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 65
Lot 38: Kasto Model HDA520AV Heavy Duty Automatic Horizontal Bandsaw
Kasto Model HDA520AV Heavy Duty Automatic Horizontal Bandsaw, Capacity 500mm x 500mm.
Please Note: This Item is located in Birmingham. There are no loading facilities on site.
Lot 39: Jaespa Type Ash 15 Vertical Bandsaw
Jaespa Type Ash 15 Vertical Bandsaw, Front Table Size 47" x 37", Power Feed, Back Table 33" x 21", Throat 60", Daylight 26"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 40: BEWO Model 270 MAN Single Mitre Pull Down Bandsaw
BEWO Model 270 MAN Single Mitre Pull Down Bandsaw, Capacity 260 x 140 reg. Capacity 160mm Diameter rd. 60 Degrees Swivel Bow. 2 Speed Motor.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 41: Startrite Type H225 Horizontal Bandsaw
Startrite Type H225 Horizontal Bandsaw, Capacity 225mm Round, 5 x Blade Speeds 50-300fpm, Swivel Jaws 45 degree.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 42: Startrite Type H200W Horizontal Bandsaw
Startrite Type H200W Horizontal Bandsaw, Capacity 200mm (8") Blade Speeds 60-225fpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 44: Wicksteed Power Hacksaw
Wicksteed Power Hacksaw, Capacity 8" Round
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 45: Cutmaster 20" Abrasive Chop Saw
Cutmaster 20" Abrasive Chop Saw, Power Feed (Variable) Motor 11 KW.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 47: Pollard Type 100 A/6. 6 Spindle Pillar Drill
Pollard Type 100 A/6. 6 Spindle Pillar Drill, Table Size 47" x 10", Rise And Fall, Spindle Speeds 660 to 3740, Throat 8".
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 48: Startrite EFI Single Spindle Drill
Startrite EFI Single Spindle Drill, Table Size 20" x 15", Spindle Taper 3 Morse, 1" Drill Capacity, Spindle Speeds 75 to 2800rpm
Please Note: This Item is located in Cheshire
Lot 49: Meddings Type S68 Pedestal Drilling Machine
Meddings Type S68 Pedestal Drilling Machine
Please Note: This Item is located in Cheshire