2412 - Engineering and Fabrication Machinery Formerly Used by Anlyn Engineering Limited
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Cannock, Cheshire, Sheffield and West Midlands
Please Note: Lot 2B Leadwell V-40L Vertical Machining Centre must be collected on Friday 7th Aug 2015
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 65
Lot 8: Elga Type Hydrashear 1018 Hydraulic Guillotine
Elga Type Hydrashear 1018 Hydraulic Guillotine, Capacity 10' x 1/8"
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 9: Amada Promecam Hydraulic Press Brake
Amada Promecam Hydraulic Press Brake, Capacity 1250mm x 25 Ton, CNC Backgauge
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 10: Rico Type 1530 Hydraulic Press Brake
Rico Type 1530 Hydraulic Press Brake, Capacity 1500mm x 30 Ton, Manual Back Gauge (1989)
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 11: Colchester Triumph 2000 Straight Bed Centre Lathe
Colchester Triumph 2000 Straight Bed Centre Lathe, Swing Over Bed 15 1/4". Swing Over Cross Slide 9 1/2", Distance Between Centres 50", Spindle Bore 2 1/8", Spindle Speeds 25-2000 rpm, Quick Change Tool Post.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 12: Cincinnati 315-15-VERT-EDO Vertical Milling Machine
Cincinnati 315-15-VERT-EDO Vertical Milling Machine, Table 68" x 16". Spindle Taper 50 ISO, Spindle Speeds 16 to 1600 rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 13: Churchill Type RBY 25" Ring Grinder
Churchill Type RBY 25" Ring Grinder, Tilting Table, 25" Electro-Magnetic Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 14: Nissan Type PH01A100 Gas Fork Lift Truck
Nissan Type PH01A100 Gas Fork Lift Truck, Lifting Capacity 1000KG's, Maximum Lifting Height 3300mm, Fork Length 1000mm
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 15: Dean Smith & Grace Type 21x108 Centre Lathe
Dean Smith & Grace Type 21x108 Centre Lathe, Swing Over Bed 21", Distance Between Centres 108", Spindle Bore 3 1/2", Spindle Speeds 10 - 800rpm, 4 Way Tool Post, 2 Point Steady, 3 Jaw Chuck, Face Plate
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 15a: Harrison M400 Gap Bed Centre Lathe
Harrison M400 Gap Bed Centre Lathe, Swing Over Bed 400mm, Swing In Gap 600mm, Distance Between Centres 1500mm, Spindle Bore 70mm, Spindle Speeds 40 - 2000rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Lot 16: Harrison M390 Gap Bed Centre Lathe
Harrison M390 Gap Bed Centre Lathe, Swing Over Bed 400mm, Swing In Gap 585mm, Distance Between Centres 1250mm, Spindle Bore 54mm, Spindle Speeds 25-2000rpm, Metric Leadscrew & Dials, Quick Change Tool Post, 3 Jaw Chuck
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser