3333 - Clearance Sale – Large selection of Spindle Tooling, Inspection Equipment, Electrical Motors and General Engineering Equipment and Factory Ancillaries, more lots being added………
Engineering
'Description de l''enchère'
Please Note: These lots are located in Birmingham, UK. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots présentés
- Pibomulti X1505 BT50 Spindle Speed Increaser
- Pibomulti X1505 CAT50 Spindle Speed Increaser
- Pibomulti X1205 CAT50 Spindle Speed Increaser
- Pibomulti X1505 BT50 Spindle Speed Increaser
- Pibomulti X1505 CAT50 Spindle Speed Increaser
- Pibomulti X1205 CAT50 Spindle Speed Increaser
- Pibomulti X1505 BT50 Spindle Speed Increaser
- Pibomulti X1505 CAT50 Spindle Speed Increaser
- Pibomulti X1205 CAT50 Spindle Speed Increaser
Lots 21-30 de 53
Lot 119: Qty BT35 Tooling
Qty BT35 Tooling to include Multi-lock Collet Chucks, Side Lock Chucks, Face Mill Adaptors and MT Chucks
Please Note: This lot is located in Birmingham. All/Any tooling is being offered as specifically described.
Lot 120: Bristol Tool & Gauge Rotary Coolant Adaptor / Inducer on BT40 Spindle Taper 32mm Inside Diameter
Bristol Tool & Gauge Rotary Coolant Adaptor / Inducer on BT40 Spindle Taper 32mm Inside Diameter
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. ...
Lot 121: Sandvik CAT40 to Capto C4 Spindle Tooling Holders
Sandvik CAT40 to Capto C4 Spindle Tooling Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 122: Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 123: Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 124: Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 125: Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Sandvik CAT40 to Capto C5 Spindle Tooling Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 126: Various CAT40 ER 20, 25 & 32 Spindle Tooling
Various CAT40 ER 20, 25 & 32 Spindle Tooling
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 127: Various CAT 40 to Capto C5 Spindle Tool Holders
Various CAT 40 to Capto C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 128: Various CAT40 to Capto C4 & C5 Spindle Tool Holders
Various CAT40 to Capto C4 & C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.