3333 - Clearance Sale – Large selection of Spindle Tooling, Inspection Equipment, Electrical Motors and General Engineering Equipment and Factory Ancillaries, more lots being added………
Engineering
'Description de l''enchère'
Please Note: These lots are located in Birmingham, UK. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots présentés
-
Pibomulti X1505 BT50 Spindle Speed Increaser
-
Pibomulti X1505 CAT50 Spindle Speed Increaser
-
Pibomulti X1205 CAT50 Spindle Speed Increaser
-
Pibomulti X1505 BT50 Spindle Speed Increaser
-
Pibomulti X1505 CAT50 Spindle Speed Increaser
-
Pibomulti X1205 CAT50 Spindle Speed Increaser
-
Pibomulti X1505 BT50 Spindle Speed Increaser
-
Pibomulti X1505 CAT50 Spindle Speed Increaser
-
Pibomulti X1205 CAT50 Spindle Speed Increaser
Lots 1-10 de 53
Lot 100: Pibomulti X1505 BT50 Spindle Speed Increaser
Pibomulti X1505 BT50 Spindle Speed Increaser, Ratio 1:1/5, n: 10,000 min - 1. Max: 12,000 min - 1, Cutter Clamping ERB50 Collets (Not Included)
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot 101: Pibomulti X1505 CAT50 Spindle Speed Increaser
Pibomulti X1505 CAT50 Spindle Speed Increaser, Ratio 1:1/5, n: 10,000 min - 1. Max: 12,000 min - 1, Cutter Clamping ERB50 Collets (Not Included)
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot 102: Pibomulti X1205 CAT50 Spindle Speed Increaser
Pibomulti X1205 CAT50 Spindle Speed Increaser, Ratio 1/5, n = 12,000 min - 1, Max = 15,000 min -1, ER32 Collet Clamping
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 103: Pibomulti X1205 CAT50 Spindle Speed Increaser
Pibomulti X1205 CAT50 Spindle Speed Increaser, Ratio 1/5, n = 12,000 min - 1, Max = 15,000 min -1, ER32 Collet Clamping
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 103A: Pubomulti X1205 Spindle Speed Increase
Pubomulti X1205 Spindle Speed Increaser, CAT50 Spindle Taper, Ratio 1:1 - 5, n = 12,000 min - 1, n = Max 15,000 min - 1
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 104: Gerardi G55 20 CAT50 Spindle Speed Increaser
Gerardi G55 20 CAT50 Spindle Speed Increaser, Ratio 1 - 6, Max Speed 12,000rpm, ER32 Collet Chuck. S/No. 038265 (2018)
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW ...
Lot 105: HSK 100 Spindle Tooling with ER Collet Ends
HSK 100 Spindle Tooling with ER Collet Ends, (1) x ER40, (2) x ER32, (8) x ER25, (1) x ER16
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. ...
Lot 106: Nikken & Albrect HSK100 Multi Lock Milling Chucks
Nikken & Albrect HSK100 Multi Lock Milling Chucks, C32 & 25 Collets
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 107: HSK 100 Face Mill Adaptors
HSK 100 Face Mill Adaptors, (3) x 80mm x 70mm Long, (6) x 63mm x 50mm Long
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 108: HSK 100 Face Mill Adaptors in Various Size and Length
HSK 100 Face Mill Adaptors in Various Size and Length
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.