3180 - CNC Lathes, Machining Centres, Bridge Type and Plano Milling Machines, Thread Rolling, Fabrication and Toolroom Machinery Formerly Used By Ham Baker Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Risk Assessments & Method Statements (RAMS) are a mandatory site requirement and should be submitted and approved prior to goods being dismantled/collected.
Please Note: These lots are located in Stoke-on-Trent, Staffordshire, UK. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 61-70 de 108
Lot 13: Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe with Electronica 2 Axis Dro, Distance between Centres 1300mm, Swing Over Bed 390mm Diameter, Spindle Speeds 25 - 2000rpm, 3 Position Quick Change Tool Post, 3 Jaw Chuck, 4 Jaw Chuck, Fixed Steady, Various Tool Post Holders and Centres . S/No. 6/0010/19570DD
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 13A: Quick Change Tool Post Holders and Soft Jaws
Quick Change Tool Post Holders and Soft Jaws
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 13, 13A
Combination of lots 13, 13A
Lot 13 - Colchester Triumph 2000 Gap Bed Centre Lathe with Electronica 2 Axis Dro, Distance between Centres 1300mm, Swing Over Bed 390mm Diameter, Spindle Speeds 25 - 2000rpm, 3 Position Quick Change Tool Post, 3 Jaw Chuck, 4 Jaw Chuck, Fixed Steady, Various Tool Post Holders and Centres . S/No. 6/0010/19570DD
Lot 13A - Quick Change Tool Post Holders and Soft Jaws
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 13 | Colchester Triumph 2000 Gap Bed Centre Lathe |
| 13A | Quick Change Tool Post Holders and Soft Jaws |
Lot 14: Bridgeport Turret Head Milling Machine
Bridgeport Turret Head Milling Machine with MDC 700m 3 Axis Dro, Table Size 1470mm x 280mm, Vari Speed Head, Spindle Speeds 50 - 3750rpm, Powered Feed to X Axis, R8 Spindle Taper, Various Spindle Tool Holders. S/No.400571083
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Lot 15: Bridgeport Turret Head Milling Machine
Bridgeport Turret Head Milling Machine with Heidenhain 2 Axis Dro, Table Size 1070mm x 230mm Spindle Speeds 67 - 4600rpm, Belt Drive Head, R8 Spindle Head. S/No. 9235L
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 16: Butler 8" Precision Slotting Machine
Butler 8" Precision Slotting Machine, 500mm Dia Rotary Bed, 40 - 105 Cycles Per Minute, Pulley 500rpm. S/No. 23224
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 17: BNL No. 5 Bearing Press
BNL No. 5 Bearing Press
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 18: Asquith Radial Arm Drilling Machine
Asquith Radial Arm Drilling Machine, 2000mm Arm Length, Spindle Speeds 22 - 580rpm, 5MT Spindle Taper, Box Table Size 1060mm x 840mm, Spindle Brake. S/No. P.32936 (09/73)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 19: Karmetal 500 WOS M2 Horizontal Bandsaw
Karmetal 500 WOS M2 Horizontal Bandsaw with Mitsubishi Touch Screen Control, Powered Feeder, Powered Vice, Blade Speed 22 - 100 M/Min, Blade Size 41 - 5420mm, Infeed Roller Conveyor, Swarf Augur. S/No. 520-43 (2015)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 20: Bauer S 320 DG - L Horizontal Bandsaw
Bauer S 320 DG - L Horizontal Bandsaw, Infeed Roller Conveyor. S/No. 14 - 96004 (2014)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.