3180 - CNC Lathes, Machining Centres, Bridge Type and Plano Milling Machines, Thread Rolling, Fabrication and Toolroom Machinery Formerly Used By Ham Baker Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Risk Assessments & Method Statements (RAMS) are a mandatory site requirement and should be submitted and approved prior to goods being dismantled/collected.
Please Note: These lots are located in Stoke-on-Trent, Staffordshire, UK. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 108
Lot 2B: Fixed Tooling suitable for Doosan Lynx 300M
Fixed Tooling suitable for Doosan Lynx 300M
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2C: Fixed Tooling suitable for Doosan Lynx 300M
Fixed Tooling suitable for Doosan Lynx 300M
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2D: DA Collets Suitable for Driven Tool Holder on Doosan Lynx 300M
DA Collets Suitable for Driven Tool Holder on Doosan Lynx 300M
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2E: Eppinger Preci-Flex Adaptor
Eppinger Preci-Flex Adaptor for Fixed Tool Holder on Doosan Lynx 300M
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2F: ER Collet Chuck and Straight Shanked Sleeve
ER Collet Chuck and Straight Shanked Sleeve suitable for Fixed Tool Holder on Doosan Lynx 300M
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 2, 2A, 2B, 2C, 2D, 2E, 2F
Combination of lots 2, 2A, 2B, 2C, 2D, 2E, 2F
Lot 2 - Doosan Lynx 300M CNC Turning Centre with Doosan Fanuc I Series CNC Control, 12 Position Tool Turrret, 9 Tool Holders (2 Driven), Samchully HS-210 3 Jaw Chuck, Parts Catcher, Filter Mist S800 Oil Mist Extractor Unit, Coolant System, Swarf Conveyor. S/No. ML0032-000163 (2011)
Lot 2A - Driven Tooling suitable for Doosan Lynx 300M
Lot 2B - Fixed Tooling suitable for Doosan Lynx 300M
Lot 2C - Fixed Tooling suitable for Doosan Lynx 300M
Lot 2D - DA Collets Suitable for Driven Tool Holder on Doosan Lynx 300M
Lot 2E - Eppinger Preci-Flex Adaptor for Fixed Tool Holder on Doosan Lynx 300M
Lot 2F - ER Collet Chuck and Straight Shanked Sleeve suitable for Fixed Tool Holder on Doosan ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3: Harrison Alpha 1550 XM Gap Bed CNC Lathe
Harrison Alpha 1550 XM Gap Bed CNC Lathe with Fanuc Series Oi-TD Control, Capto Spindle Taper Driven Tool Stock Holder, Distance between Centres 3000mm, Swing Over Bed 560mm Diameter, Spindle Bore Diameter 103mm, Spindle Speeds 2000rpm, (20 x Coromant Capto Driven Tool Holders, Capto C5 & C6 Spindle Tooling, Capto Spindle Setting Bar, 3 Jaw Chuck, 4 Jaw Chuck, Centre Driver Plate, Fixed Steady, Rear Spindle Bar Steady's. S/No. X4M033 (2015)
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This lot is located in Stoke-on-Trent, ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe
Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe Mounted in Tooling Trolley
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3B: Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe
Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3C: Filtermist FX7002 Oil Mist Extractor on Floor Stand
Filtermist FX7002 Oil Mist Extractor on Floor Stand
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.