3139 - Agie Charmilles Mikron HPM 450U Multi-Pallet Machining Centres, Haas Minimill/VF2/VF3/VF4 Machining Centres, Paint Booths, Compressors and More, formerly used by Innova Design & Build

Engineering

L'enchère s'est terminée le

2022-09-13 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Virtual Tour

Virtul Tour

 

Please Note:  These lots are located in Hampshire, UK except for Lot 5 which is located in Birmingham, UK.  Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser.  All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations.  This process is now a mandatory UK export requirement from 1st January 2021.  All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only.  Please contact our office on: +44 (121) 328 2424 or email us at: info@cottandco.com to arrange a mutally convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2022-09-15 17:00:00.0

'Date limite d''apurement'

2022-10-31 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 31-40 de 59

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
13 sept. 2022 16:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 24: CMC Piper Paint Spray & Drying Booth

CMC Piper Paint Spray and Drying Booth, Overall Size 4000mm x 4000mm, Door Width 2700mm, Touch Screen Control Panel, Rear Light Oil Burner System on Thermoventilation Unit. S/N 1299220 (2020) and Extraction Unit. S/No. 1299220 (2020)

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...

Preview image
Fin:
13 sept. 2022 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 25: Eurotechno Paint Kitchen/Mix Room

Eurotechno Extracted Paint Kitchen/Mix Room, 3m x 2.5m, Stand Alone Unit, Single Access Door, Lighting and Extraction.

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex ...

Preview image
Fin:
13 sept. 2022 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 26: Romer 515-150 Electric Double Door Oven

Romer SLS-150 Electric Double Door Oven, Roll in Trolley Size 1400mm x 1000mm (6 shelf), Maximum Temperature 230°, 15KW, External Size 2000mm x 1500mm x 2500mm. S/N 521022020321131 (2020). Country of Origin: Poland

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...

Preview image
Fin:
13 sept. 2022 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 27: Toyota 7FBEST13 Electric Forklift Truck

Toyota 7FBE ST13 Electric Forklift Truck, Capacity 1250 kg, Lift Height 3005mm (Short Mast), Side Shift, Lights, Charger, Solid Tyres.  S/No. 10988 (2010).

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Fin:
13 sept. 2022 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 28: Ford Transit Connect 1.5 Tdci, 120 ps, LWB Van

Ford Transit Connect 1.5 Tdci 120ps LWB Van, Reg. MX67 YAW, Registered 20/09/2017, Mileage: 29493, Colour: Metalic Blue Deep Impact, Charcoal Black Cloth Trim, 6 Speed Manual Gearbox, Air Conditioning, Heated Drivers Seat, Side Opening Door (Near Side), Alloy Wheels

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export ...

Preview image
Fin:
13 sept. 2022 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 29: Merris Minimix 5 Ltr Automatic Shaker (Paint)

Merris Minimix 5 Ltr Automatic Shaker (Paint). S/No. AM232 (2014)

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
13 sept. 2022 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 30: Mirka Solutions Sanding Cabinet with Extractor

Mirka Solutions Sanding Cabinet with Extractor

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
13 sept. 2022 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 31: Kingspan Ecosafe 2500 Ltr Bunded Oil Tank

Kingspan Ecosafe 2500 Ltr Bunded Oil Tank, Capacity 550 Gals / 2500l, Length 2450mm, Width 1425mm, Height 1450mm

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) ...

Preview image
Fin:
13 sept. 2022 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 32: LNS Chip Hopper Tipping Swarf Bin

LNS Chip Hopper Tipping Swarf Bin, FLT Slots, Capacity 0.35m, SWL 500kg, Net Weight 150kg, Mobile.

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
13 sept. 2022 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 33: FLT Tipping Skip

FLT Tipping Skip, Size 1000mm x 700mm x 700mm Bin, Mobile, Bottom Suds Drain Point

Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories