3139 - Agie Charmilles Mikron HPM 450U Multi-Pallet Machining Centres, Haas Minimill/VF2/VF3/VF4 Machining Centres, Paint Booths, Compressors and More, formerly used by Innova Design & Build
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Virtual Tour
Please Note: These lots are located in Hampshire, UK except for Lot 5 which is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our office on: +44 (121) 328 2424 or email us at: info@cottandco.com to arrange a mutally convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 59
Lot 10A: BT 40 Spindle Tooling
BT 40 Spindle Tooling with ER 32 & ER 16 Collet Ends
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 11: Haas VF4 4 Axis CNC Vertical Machining Centre
Haas VF4 4 Axis CNC Vertical Machining Centre with Haas Control, Fitted with Haas 4th Axis Attachment, Table Size 1320mm x 460mm, 20 Tool ATC with BT40 Spindle Tooling, 2 X 6" Machine Vices. S/No 17866 (1999). Country of Origin: USA.
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful ...
Lot 11A: Haas 5th Axis Attachment
Haas 5th Axis Attachment, Type TR160H. S/N 902375
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 12: Startrite 24-S-10 Vertical Bandsaw
Startrite 24-5-10 Vertical Bandsaw, Table Size 480mm x 480mm, Throat 610mm, 415V 3ph. S/No. 80096. Country of Origin: United Kingdom
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described. Country of Origin: UK
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot 13: Meddings Floor Standing Pillar Drill
Meddings Floor Standing Pillar Drill No: M8523. Speeds 80-4000 rpm. S/No. M4-786618. Country of Origin: United Kingdom
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described. Country of Origin: UK
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Lot 13A: Titan TTB 521 GRB 200mm Bench Grinder
Titan TTB 521 GRB 200mm Bench Grinder. S/No. 16W33 01095. Country of Origin: United Kingdom
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 13B: Sealey 6" Heavy Duty Bench Grinder
Sealey 6" Heavy Duty Bench Grinder, Type BG 150XD/99. Used as a Scotch-Brite Wheel Deburring Station. Country of Origin: United Kingdom
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an ...
Lot 13C: Clarke Belt & Disc Linisher
Clarke Belt & Disc Linisher. Country of Origin: United Kingdom
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 13D: Schallberger EF Facette Star Deburrer
Schallberger EF Facette Star Deburrer. Country of Origin: Switzerland
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 14: Haimer PC 2006 Economic Plus HSK 63 Heat Shrink Tool Power Clamp
Haimer PC 2006 Economic Plus HSK 63 Heat Shrink Tool Power Clamp with All Associated Tooling, S/No. 7202591 (2019). Country of Origin: UK
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on ...