2937 - CNC Lathes and Machining Centres, Deep Hole Boring, Honing, Gun Drilling Machines no longer required by a Deep Hole Drilling Company

Engineering

L'enchère s'est terminée le

mardi 17 nov. 2020 at 03:00PM (GMT)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Lots 205, 205A, 205 & 205A Combination and 301 are located in Oldham, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

19 nov. 2020 at 17:00 (GMT)

'Date limite d''apurement'

3 déc. 2020 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 11-20 de 122

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
17 nov. 2020 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
68
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot *: Combination of lots 3, 3A, & 3B

Combination of lots 3, 3A, & 3B

Lot 3 - Doosan Puma 3100 XLY Turning Centre (05/2015) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000172 

Lot 3A - (2) Live Tools suitable for Puma 3100 XLY

Lot 3B - (3) Tool Holders and (1) Live Tooling

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
17 nov. 2020 17:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
72
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Daewoo Puma 2500SY Turning Centre

Daewoo Puma 2500SY Turning Centre (08/2004) with Fanuc 18i-TB Control, Bar Feed, Swing Over Bed 600mm, Swing Over Saddle 550mm, Max Turning Diameter 330mm, Max Turning Length 580mm, 12 Station Turret, Tooleye, Parts Catcher, 250mm 3 Jaw Chuck. S/No. P250SY0316

Please Note: We have been made aware that this machine has a fanuc power supply fault

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will ...

Preview image
Fin:
17 nov. 2020 17:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
43
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: Haas SL-30LBCE CNC Lathe

Haas SL-30LBCE CNC Lathe (03/2008) 12 Station Turret, Max Turn Length 1525mm, Tooleye, Programmable Steady, Tailstock, Swarf Conveyor, 380mm 3 Jaw Chuck. S/No. 3079747 

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 16:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
24
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6: Haas SL-30THE CNC Lathe

Haas SL-30THE CNC Lathe (07/2007) 12 Station Turret, Tailstock, Tooleye, Swarf Conveyor, Hydraulic Steady, 250mm 3 Jaw Chuck. S/No. 3078042

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 17:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
33
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 7: Haas SL-30TCE CNC Lathe

Haas SL-30TCE CNC Lathe (05/2007) 12 Station Turret, Tailstock, Tooleye, Swarf Conveyor, 250mm 3 Jaw Chuck. S/No. 3077330 

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 16:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
61
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 8: Alex-Tech (BSA Churchill) Viper VT40/4000 Heavy Duty CNC Lathe

Alex-Tech (BSA Churchill) Viper VT40/4000 Heavy Duty CNC Lathe (02/2009) with Fanuc 21i-TB Control, Max Turn Diameter 860mm, Max Turn Length 4000mm, 12 Station Turret, Travelling Steady, Tailstock, 450mm 3 Jaw Chuck. S/No. 3360812011

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 17:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
19
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 9: Cincinnati Milacron Arrow 1000 Vertical Machining Centre

Cincinnati Milacron Arrow 1000 Vertical Machining Centre (1997) with Accramatic Control, X/Y/Z = 1020/510/510mm, Pneumatic 4th Axis, Table Size 1000mm x 500mm. S/No. 7049-A0A-RM-0168 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
15
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 10: Haas TM-1CE CNC Tool Room Mill

Haas TM-1CE CNC Tool Room Mill. S/No. 41663 (04/2005)

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 17:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
16
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 11: XYZ 560 Mini Mill Vertical Machining Centre

XYZ 560 Mini Mill Vertical Machining Centre, Table Size 600mm x 370mm, 10 Station Tool Changer. S/No. MF152 (Spares or repairs - we recommend inspection prior to bidding)

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£1000
Enchères:
20
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 12: Ryazan Ejector Drill Deep Hole Boring Machine

Ryazan Ejector Drill Deep Hole Boring Machine, Max Length Between Chucks 4000mm, Min/Max Bore Diameter 23.5mm/200mm, 400mm Chuck

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories