2937 - CNC Lathes and Machining Centres, Deep Hole Boring, Honing, Gun Drilling Machines no longer required by a Deep Hole Drilling Company

Engineering

'L''enchère se termine le'

mardi 17 nov. 2020 at 03:00PM (GMT)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Please Note: These lots are located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Lots 205, 205A, 205 & 205A Combination and 301 are located in Oldham, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buyer's premium

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

19 nov. 2020 at 17:00 (GMT)

'Date limite d''apurement'

3 déc. 2020 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 122

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Doosan Puma 3100 XLY Turning Centre

Doosan Puma 3100 XLY Turning Centre (03/2014) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000140 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
1
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1A: (2) Live Tooling suitable for Puma 3100XLY

(2) Live Tooling suitable for Puma 3100XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
2
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1B: (2) Live Tooling suitable for Puma 3100XLY

(2) Live Tooling suitable for Puma 3100XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
1
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1C: (1) Live Tool and (2) Tool Holders

(1) Live Tool and (2) Tool Holders

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
2
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1D: (1) Live Tool and (2) Tool Holders

(1) Live Tool and (2) Tool Holders

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 1, 1A, 1B, 1C, 1D

Preview image
Fin:
17 nov. 2020 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
43
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot *: Combination of lots 1, 1A, 1B, 1C, 1D

Combination of lots 1, 1A, 1B, 1C, 1D

Lot 1 - Doosan Puma 3100 XLY Turning Centre (03/2014) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000140

Lot 1A - (2) Live Tooling suitable for Puma 3100XLY

Lot 1B - (2) Live Tooling suitable for Puma 3100XLY

Lot 1C - (1) Live Tool and (2) Tool Holders

Lot 1D - (1) Live Tool and (2) Tool Holders

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from ...

Preview image
Fin:
17 nov. 2020 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
58
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Doosan Puma 400LB CNC Turning Centre

Doosan Puma 400LB CNC Turning Centre (09/2012) with Fanuc 32i-A Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Max Swing Over Bed 700mm, Swing Over Saddle 590mm, Max Turning Diameter 550mm, Max Work Length 2100mm, Tailstock, 10 Station Turret, Tooleye, Swarf Conveyor, 380mm 3 Jaw Chuck. S/No. ML0133-004592 

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
17 nov. 2020 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Doosan Puma 3100 XLY Turning Centre

Doosan Puma 3100 XLY Turning Centre (05/2015) with Fanuc 31i Control, SMW Autoblok SLU-X-4-MS 30-245mm Hydraulic Steady, Swing Over Bed 850mm, Swing Over Saddle 670mm, Max Turning Diameter 420mm, Max Work Length 2125mm, 12 Station Turret, Y Travel 130mm, Tooleye, Swarf Conveyor, 310mm 3 Jaw Chuck. S/No. ML0121-000172 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 3, 3A, & 3B

Preview image
Fin:
17 nov. 2020 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
4
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3A: (2) Live Tools suitable for Puma 3100 XLY

(2) Live Tools suitable for Puma 3100 XLY

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 3, 3A, & 3B

Preview image
Fin:
17 nov. 2020 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
1
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3B: (3) Tool Holders and (1) Live Tooling

(3) Tool Holders and (1) Live Tooling

Please Note: This lot is located in St Albans, Hertfordshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of lots 3, 3A, & 3B

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories