3139 - Agie Charmilles Mikron HPM 450U Multi-Pallet Machining Centres, Haas Minimill/VF2/VF3/VF4 Machining Centres, Paint Booths, Compressors and More, formerly used by Innova Design & Build
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Virtual Tour
Please Note: These lots are located in Hampshire, UK except for Lot 5 which is located in Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our office on: +44 (121) 328 2424 or email us at: info@cottandco.com to arrange a mutally convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 59
Lot 14A: HSK 63 Heat Shrink Spindle Tooling
HSK 63 Heat Shrink Spindle Tooling, Various Size Cutters, Includes 5 X Weldon Shank Tool Holders
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. ...
Lot 15: Freddy Superminor Oil/Coolant Suck and Blow Unit
Freddy Superminor Oil/Coolant Suck and Blow Unit. S/No. 19100//8239 (2019). Country of Origin: UK
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 16: Mitutoyo Euro-M574 Co-ordinate Measuring Machine
Mitutoyo Euro-M574 (Co-ordinate Measuring Machine, Renishaw MH 20i Probe Head, Granite Bed Size 850mm x 1160mm, Size Between Column 720mm, PC and Monitor with QCT Software and Dongle. S/No. N0087804. Country of Origin: Japan
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now ...
Lot 17: Mitutoyo Euro-C544 Co-ordinate Measuring Machine
Mitutoyo Euro-C544 Co-ordinate Measuring Machine, Renishaw PH IOT Probe Head, Granite Bed Size 810mm x 865mm, Size Between Column 655mm, PC and Monitor with QCT Software, Dongle and Joystick Pendant. S/No 0795705C. Country of Origin: Japan
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...
Lot 18: Vision Engineering Mantis Elite UV 3D Inspection Microscope
Vision Engineering Mantis Elite UV 3D Inspection Microscope, Fitted with Vision Elite X6 Lens
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described. Country of Origin:UK
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) ...
Lot 19: Boge C22-2 LFDR-500 Air Compressor
Boge C22-2 LFDR-500 Air Compressor, Mounted on 500Ltr Air Receiver Tank, Maximum Pressure 10 Bar, Motor Power 22KW. S/No. 5156684 (2021). Country of Origin: Germany
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All ...
Lot 20: Airko Solution 22SC Air Compressor
Airko Solution 22 SC Air Compressor, Mounted on 500 Ltr Air Receiver Tank, Volume Flow 1.23 - 3.37 M3/Min, Maximum Pressure 5-13 Bar, Motor Power 22KW. S/N. F1509299/50035027 (2015). Country of Origin: Austria
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 21: Mark M5A 15/8, G2 Air Compressor
Mark M5A 15/8 G2 Air Compressor, 15KW, 8 Bar Compressor. S/No. CA1556596 (2012). Country of Origin: Italy
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. ...
Lot 22: Plasburn Plastics Engineering Ltd Surface Treatment/Chemical Conversion Line
Plasburn Plastics EngineeringLtd Surface Treatment/Chemical Conversion Line, 12 Tank Set up to Include: Oxidite C-14 Cleaner and D-30 Desmutter with 2 X Cold Water Rinse Tanks, Iridite NCP and Surtec - 650 Tanks with 5 X Cold Deionised Water Tanks and 1 X Hot Deionised Water Rinse Tank, Extraction and Electrical Switch Panel, Sat in Plastic Bund Tray with L Shaped Front Walk Way, 5 Braude Thermaster Monitors. Country of Origin: UK
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and ...
Lot 23: Eurotecno (CMC) Paint Spray & Drying Booth
Eurotecno (CMC) Paint Spray & Drying Booth, Overall Size 4000mm X 4000mm, Door Width 2700mm, Touch Screen Control Panel, Model Painting Cabin - Drying, Treated Air Quantity M3/H 16.000, Maximum Quantity of Painting Product 1.6 kg/h, Maximum Working Temperature 80°C, Rear Extraction with Light Oil Burner System, Internal Hanging Roller Rail. S/No. 1265919 (2019) with Associated Controls, Extraction and Pipework.
Please Note: This Lot is located in Hampshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to export it from ...