2912 - HAAS, XYZ & Chiron Machining Centres, Bandsaws, Spark Eroders, Drills and other Ancillary Items no longer required

Engineering

Auction ended on

2020-08-19 15:00:00.0

Time left

Auction finished

Auction description

Please Note: These lots are located in Birmingham. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.

Buyer's premium

Buyer's Premium will be charged at 18.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2020-08-21 17:00:00.0

Final clearance date

2020-09-03 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 62

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
19 Aug 2020 17:00:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 100: HAAS VF-3YT/50 Vertical Machining Centre

HAAS VF-3YT/50 Vertical Machining Centre with HAAS Control, Table size = 1321 mm x 584 mm, X/Y/Z = 1016/660 (extended) /635mm, Spindle Taper BT-50, Spindle Speed 7500rpm, Automatic Chip Auger, Rigid Tapping, Renishaw Wireless Tool-Setting Probe, 15” LCD Colour Screen, Helical Interpolation, 30-Tool ATC. S/No. 1110608 (02/2014)

Please Note: This lot does not include any Tooling

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 100A: BT50 Tooling Suitable for Haas VF3YT

BT50 Tooling Suitable for Haas VF3YT (May Need Tool Studs Changing)

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Preview image
Ends:
19 Aug 2020 15:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 100B: XYZ Mini Mill KR MF 560 Vertical Machining Centre

XYZ Mini Mill KR MF 560 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 610mm x 370mm, 20 Station Tool Changer, BT40 Back End Tooling. S/No. MF284 (2007)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 101: XYZ Mini Mill 560 Vertical Machining Centre

XYZ Mini Mill 560 Vertical Machining Centre with Sinumerik 828D Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Tooling. S/No. MF383 (01/12)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 15:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 102: XYZ 710 Vertical Machining Centre

XYZ 710 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 800mm x 450mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMT00112 (2007)

Please Note: The Siemens Sinumerik 810D Control is in need of repair or replacement - Replacement board; Part No. 6FC5410-0AY03-1AA0 (CCU3.4) 

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 103: Chiron FZ 15W Machining Centre

Chiron FZ 15W Machining Centre with Siemens Control, Twin Table – Table 1 680mm x 400mm, Table 2 680mm x 400mm, 20 Station Toolchanger, Swarf Conveyor, Air Cylinder. S/No. 144-03 (2000)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 103A: Agie Cut Classic 3 Wire Eroder

Agie Cut Classic 3 Wire Eroder with Agie Vision Control, Working Area 850mm x 550mm, ICS TAE Evo Chiller. S/No. 229 (2000) 

Please Note: Control Boards PSC04 & HPS10 are missing. This item is being sold ‘as is’ spares or repairs.

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
19 Aug 2020 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 103B: Eurospark EZE 2030 Manual ZNC EDM Machine

Eurospark EZE 2030 Manual ZNC EDM Machine with Eruospark EZE Control and Programmable Z Depth, 50 Amp Generator, Work Table Size 600mm × 300mm, Travel X, Y, Z 300mm x 200mm x 200mm, Ram Platen to Work Table 190 ~ 500mm, Max. Electrode Weight 75kg, Max. Workpiece Weight 900kg, Work Tank Size W × D × H 980mm × 550mm × 300mm (2003)

Please Note: This lot is located in Birmingham. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 17:00:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 104: Charmilles Isopulse 25 Spark Eroder

Charmilles Isopulse 25 Spark Eroder, Table size 340mm x 230mm with Heidenhain Dro.

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
19 Aug 2020 16:40:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 104A: Sodick AP3 Model FS-SAP3 Spark Eroder

Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)

Please Note: This Machine is not in working order, sold as is for spares and repairs

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

 

 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories