2912 - HAAS, XYZ & Chiron Machining Centres, Bandsaws, Spark Eroders, Drills and other Ancillary Items no longer required

Engineering

L'enchère s'est terminée le

2020-08-19 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Birmingham. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2020-08-21 17:00:00.0

'Date limite d''apurement'

2020-09-03 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 62

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
19 août 2020 17:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 100: HAAS VF-3YT/50 Vertical Machining Centre

HAAS VF-3YT/50 Vertical Machining Centre with HAAS Control, Table size = 1321 mm x 584 mm, X/Y/Z = 1016/660 (extended) /635mm, Spindle Taper BT-50, Spindle Speed 7500rpm, Automatic Chip Auger, Rigid Tapping, Renishaw Wireless Tool-Setting Probe, 15” LCD Colour Screen, Helical Interpolation, 30-Tool ATC. S/No. 1110608 (02/2014)

Please Note: This lot does not include any Tooling

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 100A: BT50 Tooling Suitable for Haas VF3YT

BT50 Tooling Suitable for Haas VF3YT (May Need Tool Studs Changing)

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Preview image
Fin:
19 août 2020 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 100B: XYZ Mini Mill KR MF 560 Vertical Machining Centre

XYZ Mini Mill KR MF 560 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 610mm x 370mm, 20 Station Tool Changer, BT40 Back End Tooling. S/No. MF284 (2007)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 101: XYZ Mini Mill 560 Vertical Machining Centre

XYZ Mini Mill 560 Vertical Machining Centre with Sinumerik 828D Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Tooling. S/No. MF383 (01/12)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 102: XYZ 710 Vertical Machining Centre

XYZ 710 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 800mm x 450mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMT00112 (2007)

Please Note: The Siemens Sinumerik 810D Control is in need of repair or replacement - Replacement board; Part No. 6FC5410-0AY03-1AA0 (CCU3.4) 

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 103: Chiron FZ 15W Machining Centre

Chiron FZ 15W Machining Centre with Siemens Control, Twin Table – Table 1 680mm x 400mm, Table 2 680mm x 400mm, 20 Station Toolchanger, Swarf Conveyor, Air Cylinder. S/No. 144-03 (2000)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 103A: Agie Cut Classic 3 Wire Eroder

Agie Cut Classic 3 Wire Eroder with Agie Vision Control, Working Area 850mm x 550mm, ICS TAE Evo Chiller. S/No. 229 (2000) 

Please Note: Control Boards PSC04 & HPS10 are missing. This item is being sold ‘as is’ spares or repairs.

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Fin:
19 août 2020 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 103B: Eurospark EZE 2030 Manual ZNC EDM Machine

Eurospark EZE 2030 Manual ZNC EDM Machine with Eruospark EZE Control and Programmable Z Depth, 50 Amp Generator, Work Table Size 600mm × 300mm, Travel X, Y, Z 300mm x 200mm x 200mm, Ram Platen to Work Table 190 ~ 500mm, Max. Electrode Weight 75kg, Max. Workpiece Weight 900kg, Work Tank Size W × D × H 980mm × 550mm × 300mm (2003)

Please Note: This lot is located in Birmingham. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 17:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 104: Charmilles Isopulse 25 Spark Eroder

Charmilles Isopulse 25 Spark Eroder, Table size 340mm x 230mm with Heidenhain Dro.

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
19 août 2020 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 104A: Sodick AP3 Model FS-SAP3 Spark Eroder

Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)

Please Note: This Machine is not in working order, sold as is for spares and repairs

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

 

 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories