3305 - Last Remaining Items; 3 x Schumag Bright Bar Drawing Lines & 100t Aetna Standard Draw Bench and Processing Equipment due to frustrated Export

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, ...

Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag/Casa Grande IIBF, Flat Bar Drawing Line, 12mm – 30mm x 12-Ton Pull Capacity, including Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator. Milling Type Pointer, Horizontal/Vertical Pre Straightening, Vogel & Schumann 4-Wheel (35KW) Shot Blast, Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator, Milling Type Pointer, Horizontal/Vertical Pre Straightening

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Vogel & Schumann 4-Wheel (35KW) Shot Blast

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Crack Detector, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.