3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 36
Przedmiot 10: S F M Twin Roll 48” Long Powered Bending Rolls
S F M Twin Roll 48” Long Powered Bending Rolls
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Przedmiot 11: M G 3 Roll Pyramid Bending Rolls
M G 3 Roll Pyramid Bending Rolls Model MH 314C with Pre-Bend Arrangement, Driven Rolls Top Roll 200mm x 1250mm Lower Rolls 180mm. Country of Origin: Italy
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 12: Edwards Truecut DD Guillotine Shear Model 13 – 3000
Edwards Truecut DD Guillotine Shear Model 13 – 3000 with Power Backgauge and Digital Display, Variable Rake, Blade Gap and Stroke Adjustment, 3 Front Support Arms Left Side Square Arm, Footswitch Control. (Customer Notice Capacity on M/C 10mm M.S 15mm Aluminium) Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Przedmiot 13: Excel Radial Drill Model RD 1100
Excel Radial Drill Model RD 1100 with Box Table and Vice, Spindle Centre to Column 1100mm, Drill Head Travel 800mm, Spindle 4 MT, Speeds 44 – 1500rpm Power Rise and Fall, Spindle Brake, Coolant. S/No. 5209 (2006). Country of Origin: Singapore
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...
Przedmiot 14: Kingsland Universal Metalworker Model 85XS
Kingsland Universal Metalworker Model 85XS – Punch Capacity 85 Ton, Universal Machine with Punch Station – Angle – Section Cutting – Shearing – Notching Punch 55 Dia Thru 12mm 33 Dia Thru 20mm – Shear Flat Bar 380mm x 20mm – Shear Angle 90° 150mm x 15mm 45° 80mm x 10mm Shear Rounds 50mm. S/No. 980898. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...
Przedmiot 15: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000533391. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 16: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000331551. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 17: Multimatrix Phoenix EWM Mig/Mag Pulse Welder
Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000704087. Country of Origin: Germany
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Przedmiot 18: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch
Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 31630. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Przedmiot 19: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch
Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 34110. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.