2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 18.00%.
IVA
IVA applicata pari al 22.00%.
Date ispezioni
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 21-30 di 129
Lotto 11: PBR T-400 Parallel Lathe
PBR T-400 Parallel Lathe, 3-Jaw Chuck diameter 430mm, Distance between Centres 1600mm, Bore Size 130mm, 3-Jaw Chuck 350mm with Gapbed.
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 12: Momac Tormio Parallel Lathe
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca qui
Lotto 12A: Quick Change Tooling for Momac Tormio Parallel Lathe
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Attenzione, questo lotto è disponibile anche come combinazione.
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca qui
Lotto *: Combination of Lots 12 & 12A
Combination of Lots 12 & 12A
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
and
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotti compresi in questa combinazione
Il meccanismo "Combinazione Lotti" offre ai nostri clienti un modo semplice per fare un'offerta su una serie di articoli correlati, se vuoi capire meglio clicca qui| Lotto # | Descrizione |
|---|---|
| 12 | Momac Tormio Parallel Lathe |
| 12A | Quick Change Tooling for Momac Tormio Parallel Lathe |
Lotto 13: Tiger FU120 Milling Machine
Tiger FU120 Milling Machine with Table Size 1300mm x 300mm and Tooling Bench
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 14: Tiger FU3L-2-71 Milling Machine
Tiger FU3L-2-71 Milling Machine with Table Size 1600mm x 310mm with Vertical Head and Viking Automation DRO
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 15: Cams 250 SAC Shaper
Cams 250 SAC Shaper with Table Size 560mm x 340mm. S/No. 12537 (1988)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 16: Azimut 2m Radial Drill
Azimut 2m Radial Drill, Type 1600 X50 with Box Table 630mm x 500mm x 500mm. S/No. 1528A (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 17: Sasso Torimo TRL 1300 1.6m Radial Drill
Sasso Torimo TRL 1300 1.6m Radial Drill with Box Table 500mm x 630mm x 500mm. S/No. 1390 (1965)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lotto 18: Bimak Model 25CR Drill
Bimak Model 25CR Drill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.