3347B - Selection of Fabrication & Welding Machinery and Equipment previously used in the Oil & Gas Industry, surplus to the ongoing requirements of a retained client

Engineering

L'enchère s'est terminée le

2025-02-04 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These lots are located in Cumbernauld and Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. 

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

 

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available strictly by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2025-02-06 17:00:00.0

'Date limite d''apurement'

2025-02-20 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 21-30 de 47

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
04 févr. 2025 16:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 23: Murex Transmig 350C Mig Welding Set

Murex Transmig 350C Mig Welding Set, Serial No. 438-812-0276

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export ...

Preview image
Fin:
04 févr. 2025 15:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 24: Nederman Portable Dust Collector

Nederman Portable Dust Collector

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st ...

Preview image
Fin:
04 févr. 2025 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 25: Fronius MagicWave 3000 Watercooled Tig Welder

Fronius MagicWave 3000 Watercooled Tig Welder, Serial No. 8140154

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic ...

Preview image
Fin:
04 févr. 2025 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 26: Cooperheat 6-Way, 3-Phase Distribution Control Unit

Cooperheat 6-Way, 3-Phase Distribution Control Unit

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation ...

Preview image
Fin:
04 févr. 2025 17:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 27: Crown Windley Marking Out Table

 Crown Windley Marking Out Table 4` x 6`, 35” high with levelling screws

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export ...

Preview image
Fin:
04 févr. 2025 17:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 28: Marking Out Table

Marking Out Table 4` x 6`, 35” high with levelling screws

Location: These lots are located in Worksop, Nottinghamshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation ...

Preview image
Fin:
04 févr. 2025 16:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 29: T slotted table 11 ft x 6 ft x 9" high 6T

T slotted table 11 ft x 6 ft x 9" high 6T

Location: These lots are located in Cumbernauld, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st April ...

Preview image
Fin:
04 févr. 2025 15:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 30: T slotted table 16 ft (not including both 5" ends) x 7.1/2 ft x 10" high, 7T

T slotted table 16 ft (not including both 5" ends) x 7.1/2 ft x 10" high, 7T

Location: These lots are located in Cumbernauld, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control ...

Preview image
Fin:
04 févr. 2025 16:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 31: 19 ft long x 6 ft wide x 20" High, 8.3 T Marking Out Table

19 ft long x 6 ft wide x 20" High, 8.3 T Marking Out Table,

Location: These lots are located in Cumbernauld, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation ...

Preview image
Fin:
04 févr. 2025 16:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 32: 19 ft long x 6 ft wide x 20" High, 8.3 T Marking Out Table

19 ft long x 6 ft wide x 20" High, 8.3 T Marking Out Table

Location: These lots are located in Cumbernauld, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

UK Strategic Export Control Legislation (1st ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories