3347 - Large Capacity Union & Mazak Boring & Turning Machine Tools, Cladding Machinery & Fabrication Equipment previously used in the Oil & Gas Industry, surplus to the ongoing requirements of a retained client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Locations: These lots are located in Irvine, Cumbernauld, Bredbury, Sheffield, UK. Please see individual lots for loading information.
Viewing Days available Monday 9th - Wednesday 11th December 2024 with Adam Iddles. By appointment only. Please contact Adam on +44 (0) 7961 279 966 to make an appointment.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance
in accordance with OEM/UK Strategic Export Controls Legislation of
1st April 2024 for goods purchased at auction. The purchaser shall
also be responsible for all associated costs in obtaining
measurements/accuracy checks for export classification needed for
an export application. An Export License Application Fee of
£350 plus VAT shall be applicable for goods requiring an
export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 13
Lot 1: Union KCU-130 Table Type Horizontal Boring & Milling Machine
Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in ...
Lot 2: Mazak Integrex E-650H Multi-Tasking Lathe
Mazak Integrex E-650H Multi-Tasking Lathe with Mazatrol 640M Pro Control, 4000mm B/C, Manual 600mm dia Steady, 600mm Dia Chuck, Filtermist, Swarf Conveyor. Serial No. 176178 (2005)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...
Lot 3: Mazak Integrex E-650H Multi-Tasking Lathe
Mazak Integrex E-650H Multi-Tasking Lathe with Mazatrol PC-Fusion 640M Pro Control, 3000mm B/C, SMW-Autoblock KS-MSW 135-460mm Hydraulic Steady, Boring Bar Attachment, 120 ATC, Swarf Conveyor. S/No. 159927 (2002)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...
Lot 4: Mazak Integrex E-410H Multi-Tasking Lathe
Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Lot 5: Mazak Integrex INTE50YR-2500U Multi-Tasking Lathe
Pre-auction offer accepted
Mazak Integrex INTE50YR-2500U Multi-Tasking Lathe with PC-Fusion 640MT Control, SMW-Autoblock SLU-5 50-310mm Hydraulic Steady, Tailstock, Swarf Conveyor, Chuck Diameter = 381mm (15"), Chuck Bore Diameter = 85 mm (approx.), Max Distance between Centres = 2500mm. Serial No. 155394 (2001)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful ...
Lot 6: Mazak Integrex INTE50YR-2500U Multi-Tasking Lathe
Pre-auction offer accepted
Mazak Integrex INTE50YR-2500U Multi-Tasking Lathe with PC-Fusion 640MT Control, SMW-Autoblock SLU-5 50-310mm Hydraulic Steady, Tailstock, Swarf Conveyor, Chuck Diameter = 381mm (15"), Chuck Bore Diameter = 85 mm (approx.), Max Distance between Centres = 2500mm. Serial No. 148210 (2000)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful ...
Lot 7: Mazak Mazatech FH880 Twin Pallet Horizontal Machining Centre
Mazak Mazatech FH880 Twin Pallet Horizontal Machining Centre with Mazatrol M-Plus Control, Table Size 800 x 800mm. S/No. 137747 (1998)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which ...
Lot 8: Mazak Slant Turn 80 CNC Lathe
Mazak Slant Turn 80 CNC Lathe with Mazatrol M-Plus Control, 3 x Manual Steadies, 4000mm B/C. Serial No. 135656 (1998)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export ...
Lot 9: Mazak A16 Megaturn CNC Vertical Borer
Mazak A16 Megaturn Multi-Pallet CNC Vertical Borer with Mazatrol T32-3 Control, Table Diameter 1650mm, Max Swing 2030mm, 30 Position ATC, Travel X/Z = 2150/1275mm, Max Table Weight 12,000kgs. S/No. 85913 (1990)
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...
Lot 10: Mazak A16 Megaturn Multi-Pallet CNC Vertical Borer
Mazak A16 Megaturn Multi-Pallet CNC Vertical Borer with Mazatrol T32-3 Control, Table Diameter 1650mm, Max Swing 2030mm, 30 Position ATC, Travel X/Z = 2150/1275mm, Max Table Weight 12,000kgs
Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described.
Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...