3270 - Christmas Collective - CMZ, HAAS, XYZ, Bridgeport Milling Machines, Hardinge Turning Centre, Grinders, Lathes and Toolroom Equipment no longer required
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Burton-on-Trent and Birmingham, UK.
Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 54
Lot 3B: Various Carbide Insert Face Mills
Various Carbide Insert Face Mills, Including Carbide Inserts and Cutters. Country of Origin: United Kingdom
Please Note: This lot is located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 3, 3A & 3B
Combination of lots 3, 3A & 3B
Lot 3 - XYZ 4000 CNC Milling Machine with Power Draw Bar with Proto-Trak MX3/DPM 4000 Control, Table Size 1470mm x 255mm, Spindle Speeds Max 3600rpm, Power Drawbar. ISO 40 Spindle Taper, Various Spindle Tooling. S/No. 8361 (1997). Country of Origin: Taiwan
Lot 3A - Various ISO 40 Spindle Tooling. Country of Origin: United Kingdom
Lot 3B - Various Carbide Insert Face Mills, Including Carbide Inserts and Cutters. Country of Origin: United Kingdom
Please Note: This lot is located in Burton-on-Trent, UK. A charge of £275 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | XYZ 4000 CNC Milling Machine (1997) |
| 3A | Various ISO 40 Spindle Tooling |
| 3B | Various Carbide Insert Face Mills |
Lot 4: Hardinge Talent T1 2 Axis Turning Centre
Hardinge Talent T1 2 Axis Turning Centre with Fanuc OTA CNC Control, 10 Tool Turret, Collet Chuck, Sameca Monosam 45 Bar Feeder, Spindle Drive 5.5 - 7.5. S/No. 4500079. Country of Origin: Taiwan
Please Note: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...
Lot 4A: Harrison Alpha 400 CNC/Manual Gap Bed Lathe
Harrison Alpha 400 CNC/Manual Gap Bed Lathe with Harrison GE Fanuc Control, Distance between Centres 1250mm, Swing Over Bed 420mm Diameter, Spindle Speeds 15-2500rpm, 3 Position QCTP with Various Tool Holders, Steady. S/No. A30196 (1997)
Please Note: This lot is located in Birmingham, UK. A charge of £275 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...
Lot 5: Hitachi Seiki HiTec Turn 20 NC Lathe
Hitachi Seiki HiTec Turn 20 NC Lathe S/No. 20540 with Fanuc System 3T NC Control, Max Swing 450mm, X Axis Travel 170mm, 2 Axis Travel 340mm, 12 Tool Turret, Sameca SAM 65 Bar Feeder,. S/No. 2418 (1985). Country of Origin: Japan
Please Note: This lot is located in Burton-on-Trent, UK. A charge of £275 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to ...
Lot 5A: Harrison Alpha 460 CNC/Manual Gap Bed Centre Lathe
Harrison Alpha 460 CNC/Manual Gap Bed Centre Lathe with Harrison GE Fanuc Control, Distance between Centres 1500mm, Swing Over Bed 460mm diameter, Spindle Bore 76mm, Spindle Speeds 20 - 2000rpm, 3 Position QCTP with Toolholders, Fixed Steady. S/No. A40064 (1996)
Please Note: This lot is located in Birmingham, UK. A charge of £275 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT ...
Lot 6: Bridgeport Series 1 2HP Turret Head Milling Machine
Bridgeport Series 1 2HP Turret Head Milling Machine with 2 Axis Dro, Rise Block on Column Fitted, Power Traverse to X & Y Axis, Vari Speed Head, R8 Spindle Taper, Braithwait Re-build (09 07 832T). S/No. BR282 187E
Please Note: This lot is located in Birmingham, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 6A: R8 to EC Easy Change Spindle Tooling
R8 to EC Easy Change Spindle Tooling to include Drill Chucks, Face Mill, Tapping Head, ER32 and 20 Tool Holders, DA Tool Holders, MT and Wheldon Shank Holders.
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 6 & 6A
Combination of lots 6 & 6A
Lot 6 - Bridgeport Series 1 2HP Turret Head Milling Machine with 2 Axis Dro, Rise Block on Column Fitted, Power Traverse to X & Y Axis, Vari Speed Head, R8 Spindle Taper, Braithwait Re-build (09 07 832T). S/No. BR282 187E
Lot 6A - R8 to EC Easy Change Spindle Tooling to include Drill Chucks, Face Mill, Tapping Head, ER32 and 20 Tool Holders, DA Tool Holders, MT and Wheldon Shank Holders.
Please Note: This lot is located in Birmingham, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 6 | Bridgeport Series 1 2HP Turret Head Milling Machine |
| 6A | R8 to EC Easy Change Spindle Tooling |
Lot 7: Bridgeport Series 1 Turret Head Milling Machine
Bridgeport Series 1 Turret Head Milling Machine with Heidenhain DRO, Table Size 1070mm x 230mm, Vari Speed Head, Powered Traverse to X & Y Axis, R8 Spindle Taper with Various Tooling. S/No. 381390683 WX (YOM: TBC). Country of Origin: U.S.A.
Please Note: This lot is located in Burton-on-Trent, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added ...