3216 - Phase 2 – Hurco, XYZ & Haas Machining Centres & Lathes, Toolroom Machinery, Inspection Equipment, Tooling and more no longer required by District Tooling (Harlow) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Site viewings will be available by appointment only, on Wednesday 14th June 2023 between 9.00am and 1.00pm. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 101
Lot 1: Hurco VM10i Vertical Machining Centre
Hurco VM10i Vertical Machining Centre with Win Max Hurco Control, Table Size 760 x 400mm, 20 ATC, Travels: X Axis 660mm, Y Axis 406mm, Z Axis 508mm, CAT40, 10,000rpm, 15Hp, Manufacturing Num H-V1E2384. S/No. 1610837FKAAH (2017). Country of Origin: Taiwan
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Qty CAT40 Tooling
Qty CAT40 Tooling, Hurco Dial Height Gauge
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 1 & 1A
Combination of lots 1 & 1A
Lot 1 - Hurco VM10i Vertical Machining Centre with Win Max Hurco Control, Table Size 760 x 400mm, 20 ATC, Travels: X Axis 660mm, Y Axis 406mm, Z Axis 508mm, CAT40, 10,000rpm, 15Hp, Manufacturing Num H-V1E2384. S/No. 1610837FKAAH (2017). Country of Origin: Taiwan
Lot 1A - Qty CAT40 Tooling and Hurco Dial Height Gauge
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Hurco VM10i Vertical Machining Centre |
| 1A | Qty CAT40 Tooling |
Lot 2: Haas Mini-Mill
Haas Mini-Mill, Table Size 870 x 305mm, 10 Station ATC, BT40 Spindle Taper, Spindle Speed 6,000rpm, Rigid Tapping, Coolant Tank, 9 x Spindle Tools. S/No. 1170729 (02/2020). Country of Origin: U.S.A.
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Lot 3: Hurco VM10 Vertical Machining Centre
Hurco VM10 Vertical Machining Centre, 20 ATC, Table Size 760mm x 400mm, Travel X = 660, Y = 406, Z = 508mm. S/No. VM10-16117021BHB (2011). Country of Origin: Taiwan
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Hurco 4 Axis Unit
Hurco 4 Axis Unit. S/No. H200-0419 with Tailstock.
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3B: Qty of CAT40 Tooling
Qty of CAT40 Tooling
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 3, 3A & 3B
Combination of lots 3, 3A & 3B
Lot 3 - Hurco VM10 Vertical Machining Centre, 20 ATC, Table Size 760mm x 400mm, Travel X = 660, Y = 406, Z = 508mm. S/No. VM10-16117021BHB (2011). Country of Origin: Taiwan
Lot 3A - Hurco 4th Axis Unit. S/No. H200-0419 with Tail Stock
Lot 3B - Qty of CAT40 Tooling
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | Hurco VM10 Vertical Machining Centre |
| 3A | Hurco 4 Axis Unit |
| 3B | Qty of CAT40 Tooling |
Lot 4: XYZ Proturn SLX 1630 CNC Manual Straight Bed Lathe
XYZ Proturn SLX 1630 CNC Manual Straight Bed Lathe Proto Trax SLX Control, 400mm Swing, 760mm between centres, 54mm Spindle Bore, 2500rpm, 200mm 3-Jaw Chuck. S/No. 16P10010-144 (2013). Country of Origin: United Kingdom
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4A: Various Quick Post Tool Holders
Various Quick Post Tool Holders
Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.