3197 - Large Quantity of Various DIN40/50, BT40/50 & HSK100, DIN/Capto Adaptive Spindle Tool Holders

Engineering

L'enchère s'est terminée le

2023-04-25 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2023-04-27 17:00:00.0

'Date limite d''apurement'

2023-05-11 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 71-76 de 76

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
25 avr. 2023 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 71: (10) x Various DIN40 to Capto C5 Spindle Tool Holders

(10) x Various DIN40 to Capto C5 Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
25 avr. 2023 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 72: (10) x Various DIN40 to Capto C5 Spindle Tool Holders

(10) x Various DIN40 to Capto C5 Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
25 avr. 2023 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 73: (10) x Various DIN40 to Capto C5 Spindle Tool Holders

(10) x Various DIN40 to Capto C5 Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
25 avr. 2023 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 74: (12) x Various DIN40 to Capto C5 Spindle Tool Holders

(12) x Various DIN40 to Capto C5 Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
25 avr. 2023 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 75: (11) x Various DIN40 to CaptoC4 Spindle Tool Holders

(11) x Various DIN40 to CaptoC4 Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
25 avr. 2023 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
20.00%

Lot 76: (16) x Sandvik Coromant DIN40 to 390 272 - 40 Basic Spindle Tool Holders

(16) x Sandvik Coromant DIN40 to 390 272 - 40 Basic Spindle Tool Holders

Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories