3145 - Amada AP32510V Laser Punch/Press, Gildemeister Sprint 32 & CTX400 CNC Lathes, Toolroom Machinery, Ultrasonic Wash Systems, UV Printers and more surplus to the ongoing requirements of a retained client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 34
Lot 1: Amada AP32510V Laser Punch Press Apelio III
Amada AP32510V Laser Punch Press Apelio III with Fanuc Control, AF2000C Laser (27,300 hours), Donaldson Dust Collector, LKI MP250M Sheet Load Unloader. S/No. 32510040 (1999) 5" Lens. (2005)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 2: Gildemeister Sprint 32 Linear Lathe
Gildemeister Sprint 32 Linear Lathe with GE Fanuc Series 160ib Control, IEMCA, Boss 545 32L Barfeed, Collet Chuck, Twin Head, 8000rpm Max., Parts Catcher. S/No. 2301-0142
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Lot 3: Gildemeister CTX 400 Series 2 Lathe
Gildemeister CTX 400 Series 2 Lathe with Heidenhain CNC Pilot Control, Hydrafeed (Multifeed) Barfeed, 12 Station ATC, 5" Collet Chuck, Swarf Cponveyor. S/No. 01160002901
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement ...
Lot 4: Colchester Triumph 2500 Lathe
Colchester Triumph 2500 Lathe with Anilam Mini Wizard Dro, Spindle Speed 0 - 2500rpm, 10" 3 Jaw Chuck, 1.3m between Centres. S/No. LVT50G1R JA/01
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot 5: Colchester Bantam Lathe
Colchester Bantam Lathe, 5" 3 Jaw Chuck, Distance between Centres, 508mm Spindle Speed 36 - 1600rpm, 3 Point Steady. S/No. 227127
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...
Lot 6: Bridgeport Turret Mill
Bridgeport Turret Mill, Table Size 36" x 9" with Anilam Wizard 211 Dro, Powerfeed, Spindle Speeds 67 - 4600. S/No. 2109603755
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...
Lot 7: King Rich KRV2000 Turret Mill
King Rich KRV2000 Turret Mill with Mitutoyo Dro, Spindle Speeds 60 - 4200rpm, 6" Machine Vice. S/No. 6493
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 7A: XYZ SM 3000 Milling Machine
XYZ SM 3000 Milling Machine with Proto Trak SM Control. S/No. 10082 (2004)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 8: Burgmaster Multi Section Drill
Burgmaster Multi Section Drill, 5 Stations, Table Size 40" x 24". S/No. 5870
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 9: Carter Truecut CNC Guillotine Q411D 1250mm. S/No. 0807165 (2008)
Carter Truecut CNC Guillotine Q411D, Cutting Thickness 3.5mm, Cutting Width 1250mm. S/No. 0807165 (2008)
Please Note: This lot is located in Alcester, Warwickshire, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...