3137 - Large Capacity CNC Boring Mills, CNC Lathes, VTL’s, Machine Tools, Fabrication & Inspection Equipment, Cranes, Vehicles and Much More following a change in business policy by A.Taylor & Son
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Virtual Tours
Please Note: These lots are located in Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 129
Lot *: Combination of lots 9, 9A & 9B
Combination of lots 9, 9A & 9B
Lot 9 - Daewoo Puma 250MB Slant Bed CNC Lathe with C Axis and Live Tooling, Fanuc 18T CNC Control, Swing Over Bed 570mm, Swing Over Saddle 370mm, Max Turning Length 650mm, 250mm Diameter 3 Jaw Hydraulic, Chuck, Fully Prog Tailstock, 12 Station VDI Turret (6 Live), 77mm Bar Cap, Spindle Speeds 35-3500rpm, 15kw Main Motor, Swarf Conveyor, Machine Weight 5 Tons. S/No. P25M 0148. Country of Origin: Korea
Lot 9A - Lathe Tooling for Daewoo Puma 250m
Lot 9B - Various Tipped Turning Tools
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 9 | Daewoo Puma 250MB Slant Bed CNC Lathe |
| 9A | Lathe Tooling for Daewoo Puma 250m |
| 9B | Various Tipped Turning Tools |
Lot 10: Giddings & Lewis 70a-Dp5-T Table Type Horizontal Borer with DRO
Giddings & Lewis 70a-Dp5-T Table Type Horizontal Borer with DRO, Air-Lift Table. Country of Origin: United Kingdom
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 11: Butler Elgamill Hi-Power CNC Milling Machine
Butler Elgamill Hi-Power CNC Milling Machine, Heidenhain TNC 360 CNC Control, Table Size 42” X 42”, X Travel 2000mm, Y Travel 1000mm, Z Travel 900mm (Approximate Travels). Country of Origin: United Kingdom
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Lot 12: Butler Elgamill Bed Milling Machine
Butler Elgamill Bed Milling Machine, Table Size 6000mm x 1200mm, Axis Travel (Approximate) X 4000mm, Y 1600mm Z 900mm, Heidenhain 3 Axis DRO. Country of Origin: United Kingdom
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st ...
Lot 13: Dugard Eagle 1000 VMC
Dugard Eagle 1000 3 Axis Vertical Machining Centre, Fanuc 0-MD CNC Control, Table 1200mm x 450mm, BT-40, 24 Station Tool Changer, Swarf Conveyor. S/No. ML901B03 (2001) Country of Origin: Country of Origin: Taiwan
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 13A: Qty of BT40 Spindle Tooling
Qty of BT40 Spindle Tooling
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 13 & 13A
Combination of lots 13 & 13A
Lot 13 - Dugard Eagle 1000 3 Axis Vertical Machining Centre, Fanuc 0-MD CNC Control, Table 1200mm x 450mm, BT-40, 24 Station Tool Changer, Swarf Conveyor. S/No. ML901B03 (2001) Country of Origin: Country of Origin: Taiwan
Lot 13A - Qty of BT40 Spindle Tooling
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 13 | Dugard Eagle 1000 VMC |
| 13A | Qty of BT40 Spindle Tooling |
Lot 14: Pinacho Mustang 2000 CNC Lathe
Pinacho Mustang 2000 CNC Lathe. S/No. 39895 (2000) with Fagor CNC, Duplomatic Turret. Country of Origin: Spain
Please Note: This lot is located in Pepper Road, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW ...
Lot 15: Dorries VCE 2000/140 CNC Ram-Type VTL
Dorries VCE 2000/140 CNC Ram-Type VTL with Fagor CNC Control, 12-Station Tool Changer, 1.4m 4-Jaw Chuck, Swarf Conveyor. S/No. C195/51045 (1998) Country of Origin: Germany
Please Note: This lot is located in Modder Avenue, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st ...
Lot 16: Ecoca EL-1250 CNC Lathe with Mitsubishi KWS980A Control
Ecoca EL-1250 CNC Lathe with Mitsubishi KWS980A Control, 10" Chuck Bore, 24'' 3-Jaw Chuck, 8 Station Turret, Powered Tail Stock, 3-Point Stead, 4.5m Between Centres. S/No. 8812304 (2001) Country of Origin: Taiwan
Please Note: This lot is located in Modder Avenue, Leeds, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a ...