3134 - Final Phase - Trumpf TC6000L Combination Punch Laser, Adira Press Brake, Powdercoat Paint Plant, Fabrication Equipment & Toolroom Machinery
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Newcastle-under-Lyme and Birmingham, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 58
Lot 15: Robland Z320 Sliding Table Panel Saw
Robland Z320 Sliding Table Panel Saw, 3.2m, Saw Blade Tilt 90 - 45 Degrees, Table Height 800mm, 3.2m x 0.4m Sliding Table, Sawstroke 3200mm, Cutting Length 3.2m. Country of Origin: Belgium
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 15A: Chen Jei CB-250A Horizontal Bandsaw
Chen Jei CB-250A Horizontal Bandsaw, Max Workpiece Size 250 Round, 250 x 280mm Rectangle, Blade Size 3503 x 27 x 0.9, Blade Speed 27, 40, 54, 68, 80m/min, Feed 6 - 140mm/min, Weight 1200kg, Powered Clamping. Country of Origin: Taiwan
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Lot 16: Pedrazzoli Mec Brown 75 Pull Down Cut Off Saw
Pedrazzoli Mec Brown 75 Pull Down Cut Off Saw. Country of Origin: Italy
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 17: Union Double Ended Toolpost Grinder
Union Double Ended Toolpost Grinder, Spindle Speed 1500rpm, Max Wheel Dia 14" x 2" x 11/4". Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...
Lot 18: Herbert 4 in-line Pillar Drill
Herbert 4 in-line Pillar Drill. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 18A: Large Quantity of Various size Morse Taper Drills
Large Quantity of Various size Morse Taper Drills, In rack with Various Tapping Heads. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination lot for lots 18 & 18A
Combination lot for lots 18 & 18A
Lot 18 - Herbert 4 in-line Pillar Drill. Country of Origin: Japan
Lot 18A - Large Quantity of Various size Morse Taper Drills, In rack with Various Tapping Heads. Country of Origin: Japan
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
18 | Herbert 4 in-line Pillar Drill |
18A | Large Quantity of Various size Morse Taper Drills |
Lot 19: Memoli ETM 90 Pipe Bending Machine
Memoli ETM 90 Pipe Bending Machine. S/No. 0100 (2010). Country of Origin: Italy
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 22: Denbigh No. 4 Manual Fly Press
Denbigh No. 4 Manual Fly Press. Country of Origin: United Kingdom
Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 23A: Pemserter Series 2000A Spin Riviter
Pemserter Series 2000A Spin Riviter. S/No. 2005A - 284 (1998). Country of Origin: U.S.A.
Please Note: Spares Only
Please Note: This lot is located in Birmingham, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is ...