3103 - Amada LC3015F1NT & Trumpf TC6000L Combination Punch Laser, Amada Press Brakes, Haas Machining Centres, Fabrication Equipment & Toolroom Machinery

Engineering

L'enchère s'est terminée le

jeudi 19 mai 2022 at 03:00PM (BST)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Lot 9A is located in Nottinghamshire, UK.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

23 mai 2022 at 15:00 (BST)

'Date limite d''apurement'

2 juin 2022 at 15:00 (BST)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 93

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
15
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Trumpf Trumatic TC6000L Combination Laser/Punch Press

Trumpf Trumatic TC6000L Combination Laser/Punch Press. S/No. A0100A0366 (2005) with Siemens Sinumerik 840D Control, 3200w Laser, 220kN Punch, Riedel L15/21-TR3.23 Refrigerant Chiller, Jakob Handle Dust Collection Unit, Machine Supplied Refurbished 2019. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of Lots 1, 1A & 2

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
7
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1A: Various Trumpf Punch and Dies in Tooling Cabinets

Various Trumpf Punch and Dies in Tooling Cabinets. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of Lots 1, 1A & 2

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
5
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Trumpf 6840-H3 Quicksharp Punch Tool Grinder

Trumpf 6840-H3 Quicksharp Punch Tool Grinder. S/No. 883 (1989), Machine Supplied Refurbished 2019. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of Lots 1, 1A & 2

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
30
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot *: Combination of Lots 1, 1A & 2

Combination of lots 1 & 2

Lot 1 - Trumpf Trumatic TC6000L Combination Laser/Punch Press. S/No. A0100A0366 (2005) with Siemens Sinumerik 840D Control, 3200w Laser, 220kN Punch, Riedel L15/21-TR3.23 Refrigerant Chiller, Jakob Handle Dust Collection Unit, Machine Supplied Refurbished 2019. Country of Origin: Germany

Lot 1A - Various Trumpf Punch and Dies in Tooling Cabinets. Country of Origin: Germany

Lot 2 - Trumpf 6840-H3 Quicksharp Punch Tool Grinder. S/No. 883 (1989), Machine Supplied Refurbished 2019. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
0
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: Trumpf Trumatic 500 Turret Punch Press

Trumpf Trumatic 500 Turret Punch Press with Bosch Trumagraph Control, Max Punching Capacity 220kN,Sick Light Guards, Machine Weight 11050kg. S/No. 040848. CE Mark. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 4 & 4A

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
9
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4A: Spare Head Unit for Triumph Punch Press

Spare Head Unit for Triumph Punch Press. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 4 & 4A

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
12
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot *: Combination of lots 4 & 4A

Combination of lots 4 & 4A

Lot 4 - Trumpf Trumatic 500 Turret Punch Press with Bosch Trumagraph Control, Max Punching Capacity 220kN,Sick Light Guards, Machine Weight 11050kg. S/No. 040848. CE Mark. Country of Origin: Germany

Lot 4A - Spare Head Unit for Triumph Punch Press. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
19 mai 2022 17:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
16
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: Various Dies and Punches from Trumpf Punch Press

Various Dies and Punches from Trumpf Punch Press. Country of Origin: Germany

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
19 mai 2022 17:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
86
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6: Amada LC3015F1NT CNC Laser Cutting Machine

Amada LC3015F1NT CNC Laser Cutting Machine. S/No. 28510179 (2008) Weight 11.4t with Amada Fanuc AF 4000i-B Fanuc Laser C4000 Control and LK1 Automation ASLUL 300F1, 5 Tray Plate Stack/Feeder. S/No. 1956 (2010) Weight 11,000kgs, Laser Machine Fitted with Donaldson DFO 2-6 Extraction Unit. S/No. 90061767 (2010) Ultrafilter Ultracool 0400 SP Chiller Unit. S/No. 49379 (2009), Laser Hours 28961. Country of Origin: Japan

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item ...

Preview image
Fin:
19 mai 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
69
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 7: Amada HFE 80-25SL 8 Axis Press Brake Machine

Amada HFE 80-25SL 8 Axis Press Brake Machine, Max Tonnage 800kN, Max Stroke 350mm, Bed Size 2500mm, Sick Light Guards, remanufactured by JTES June 2018. S/No. HFE80-25SL V01137 (2001), Machine Weight 6100kg. Country of Origin: Japan

Please Note: This lot is located in Newcastle-under-Lyme, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 7 & 7A

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories