3069 - Phase 2 Fagima Machining Centre, ZPS ZLIN and Comev Picodue Lathes, Secmu Mill
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: There is a strict clearance date of 23rd December 2021.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 10
Lot 5: Takisawa LA-200L 2-Axis CNC Lathe
Takisawa LA-200L 2-Axis CNC Lathe with Fanuc 0i-Mate TD Control PCMCIA H, 12-Position Turret, Clamp Spindle, 600mm Tailstock, Tool Presetter Turning Diameter: 450mm, Swarf Conveyor. S/No. C002LL0021 (2014). Country of Origin: Taiwan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *5 & 5A: Combination of lots 5 & 5A
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
5 | Takisawa LA-200L 2-Axis CNC Lathe |
5A | Top Automation FU345 Automatic Barfeed |
Lot 10: ZPS ZLIN S50 2-Axis CNC Lathe
ZPS ZLIN S50 2-Axis CNC Lathe with Fanuc OT Control, RS 232 Port, 12-Station Duplomatic Turret, 600mm Tailstock, 60mm Bar, Belgrandi Clamp Spindle & Swarf Conveyor. S/No. 221 121-0232 (1997). Country of Origin: Czech Republic
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 10, 10A & 10B
Lot 10 - ZPS ZLIN S50 2-Axis CNC Lathe with Fanuc OT Control, RS 232 Port, 12-Station Duplomatic Turret, 600mm Tailstock, 60mm Bar, Belgrandi Clamp Spindle & Swarf Conveyor. S/No. 221 121-0232 (1997). Country of Origin: Czech Republic
and
Lot 10A - IEMCA TAL Auto 6532 Automatic Barfeed. S/No. 98030221 (1998). Country of Origin: Italy
and
Lot 10B - Double Door Cabinet with Qty of Various Tooling. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
10 | ZPS ZLIN S50 2-Axis CNC Lathe |
10A | IEMCA TAL Auto 6532 Automatic Barfeed |
10B | Double Door Cabinet with Qty of Various Tooling |
Lot 30: Comev Picodue 260 x 2000 CNC Teach Lathe
Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 30 & 30A
Lot 30 - Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy
and
Lot 30A - SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady. Country of Origin: Germany
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
30 | Comev Picodue 260 x 2000 CNC Teach Lathe |
30A | SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady |
Lot 55: Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe
Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe with Fanuc 21i-TB Control, PCMCIA & RS232 Ports, 10-Position Turret, Kitagawa 250mm 3-Jaw Self-Centering Chuck, Hydraulic Tailstock, Distance between Centres: 600mm, Presetting Tool, Swarf Conveyor. S/No. CH10E11174 (2007). Country of Origin: Taiwan
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 60: FAT TUR 630A Lathe with Double Spindle
FAT TUR 630A Lathe with Double Spindle, 3-Position Turret, Centre Height: 315mm, Distance between Centres: 1600mm, 400mm Self-Centering Chuck, Rear Spindle Diameter: 315mm. S/No. D10004 (2001). Country of Origin: Poland
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici*60, 60A, 60B, 60C & 60D: Combination of lots 60, 60A, 60B, 60C & 60D
Lot 95: Centre Lathe with 3-Position Manual Turret
Centre Lathe with 3-Position Manual Turret, 250mm 3-Jaw Self-Centering Chuck, Centre Height: 220mm, Distance between Centres: 600mm. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 170: Saic Casati B50/S Automatic Lathe
Saic Casati B50/S Automatic Lathe. Country of Origin: Italy
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.