2902 - Cast Film Extrusion Lines, Converting & Pouch Forming Machinery and General Site Equipment no longer required by a Leading Flexible Packaging Manufacturer
Miscellaneous
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Offers will be considered on the main items prior to the auction, please contact the auctioneer on: + 44 (0) 121 328 2424 or email: info@cottandco.com
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 119
Lot 1: Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line
Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000), 20µm - 360µm, Max Output 500kg/h, Die Width 2700mm, Finished Width 2300mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Maddox Mixing, Vollmar 5 Component Gravimetric Blender with Re-Trim Feed, 'B' Extruder 90mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, 'C' Extruder 70mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, Cloreren Epoch II Die & Feedblock, Dynisco Screen Changer, Extrol Cast Line Control System, Twin-Roll Cast/Cooling x 700mm dia Section, Thermofisher Beta Gauge Scanner with Krypton 85 Source, Softal Double Sided ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: (4) x Stainless Steel Day Bins
(4) x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1B: Spare & Unused Cloreren V-Block
Spare & Unused Cloreren V-Block
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: * Combination of lots 1 & 1A
* Combination of lots 1 & 1A
Lot 1 - Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000)
Please Note: The clearance deadline for this is lot has been extended to 24th September 2020
Lot 1A - 4 x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)
Lot 1B - Spare & Unused Cloreren V-Block
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line |
| 1A | (4) x Stainless Steel Day Bins |
| 1B | Spare & Unused Cloreren V-Block |
Lot 2: Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line
Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010) 20µm - 600µm, Max Output 400kg/h, Die Width 2300mm, Finished Width 2000mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Hydreclaim 6 Component Continuous Blender with Re-Trim Feed, 'B' & 'C' Extruders 90mm dia, 30:1 LD Twin Helix with Madox Mixing, 5-Zone, Maguire 4 Component Gravimetric Batch Blenders, Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles, 3 x Dynisco Screen Changers Installed 2018, Excelsior Cast Line Control System, Twin-Roll Cast/Cooling x 500mm dia Section, Thermofisher L400 Scanning Frame Installed 2017, Sherman Double Sided Corona Discharge Treater, Herbold Granulator, Wintech Indexing ...
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: (4) x Stainless Steel Day Bins
(4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: * Combination of lots 2 & 2A
* Combination of lots 2 & 2A
Lot 2 - Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010)
Please Note: The clearance deadline for this is lot has been extended to 24th September 2020
Lot 2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line |
| 2A | (4) x Stainless Steel Day Bins |
Lot 3: Summit Moretto Portable Gravimetric Blender
Summit Moretto Portable Gravimetric Blender with MPI WSB-400 Series Scale, Morreto Fan
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Jenco HD100 Hopper/Dryer
Jenco HD100 Portable Hopper/Dryer. S/No. 66096
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Jenco HD100 Hopper/Dryer
Jenco HD100 Portable Hopper/Dryer. S/No. 31406
Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.