2889 - TOS Plano Mill, Skoda & TOS Lathes, TOS Grinder, Holroyd Milling Machine, Welders & Various Capacity Overhead Cranes surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: The final clearance date is 23rd July 2020.
Please Note: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 22
Lot 3: Tos Kurim FRPD16X30 4-Head Plano Mill
Tos Kurim FRPD16X30 4-Head Plano Mill, Table size: 6m x 1.6m. S/No. 39920
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Skoda SIU 250T Heavy Duty Centre Lathe
Skoda SIU 250T Heavy Duty Centre Lathe, 11m Between Centres, 4 Way Bed, Internal Grinding Head, Milling/Drilling Head, 2500mm Dia Chuck, Steadies. S/No. 22730 (1985)
Please Note: The final clearance date is 23rd July 2020.
Please Note: That the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 12: TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder
TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder, Magnetic Chuck 2m x 410mm. S/No. 168160201
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 13: TOS Type SU90A Lathe
TOS Type SU90A Lathe, 920mm 4-Jaw Chuck, 3.3m Distance Between Centres. S/No. 0419173
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 15: Holroyd Model 5AC Pump Rotor Milling Machine
Holroyd Model 5AC Pump Rotor Milling Machine
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: The final clearance date is 23rd July 2020.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 15A: Various Spares for Holyroyds
Various Spares for Holyroyds, Drive Shaft, 4-Jaw Chuck, 22'' and Spare Motors
Please Note: The high bid on this lot is subject to final acceptance and release by Howden CKD Compressors s.r.o. Please contact the auctioneer for further information.
Please Note: The final clearance date is 23rd July 2020.
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 20: ZTS KSP 02 Stavostroj Chopsaw
ZTS KSP 02 Stavostroj Chopsaw. S/No. C6-571/83
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 23: WTU 315-3 MEZ Brumov Welder
WTU 315-3 MEZ Brumov Welder. S/No. 88-21349
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 44: Qty of ISO 60 Tooling
Qty of ISO 60 Tooling
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 45: Qty of ISO 60 Tooling with Racking
Qty of ISO 60 Tooling with Racking
Please Note: The final clearance date is 23rd July 2020.
Please Note: that the closing bid will be subject to acceptance/approval by the Vendor
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.