2867 - CNC Sheet Metal Machinery & Fabrication Equipment no longer required by Portastor Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in York with the exception of Lot 11C which is located in Chesterfield and Lot 15A which is located in Birmingham. Please see individual lots for loading charges and extended clearance information.
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 144
Lot 1: Trumpf Model Trumatic L4030 3200w CNC Laser
Trumpf Model Trumatic L4030 3200w CNC Laser with Siemens 840 CNC Control, 4000mm x 2000mm Cutting Area with Auto Change Tables, TLF 3000 Laser, Surface Filter Vario Dust Extractor, Including Trumpf Loadmaster Sheet Loader. S/No 130372 (1999)
Resonator upgraded to a 3200w/LSM turbine with magnetic bearings in 2009
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 2: Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake
Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake, Admitting 4500mm Between Side Frames, 3000mm Long Heavy Duty Back Gauge with Cybelec DNC 800 8 Axis Control, (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing, Infra-Red Operator Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No 97P288 (1997)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Abus 2 Ton Crane with Gantry
Abus 2 Ton Crane with Gantry, Abus 2 Ton Hoist, Stahl 2 Ton Hoist, 7m length, 6m Width, 3.7 High Approx.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: This lot has an extended clearance date of 30th April 2020.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 2 & 2A
Combination of lots 2 & 2A
Lot 2 - Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake, Admitting 4500mm Between Side Frames, 3000mm Long Heavy Duty Back Gauge with Cybelec DNC 800 8 Axis Control, (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing, Infra-Red Operator Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No 97P288 (1997)
Lot 2A - Abus 2 Ton Crane with Gantry, Abus 2 Ton Hoist, Stahl 2 Ton Hoist, 7m length, 6m Width, 3.7 High Approx
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. ...
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | Edwards Pearson PR10 250 Ton x 5100mm Over Bed CNC Press Brake |
| 2A | Abus 2 Ton Crane with Gantry |
Lot 3: Bystronic PR 150 Ton x 4100mm Over Bed CNC Press Brake
Bystronic PR 150 Ton x 4100mm Over Bed CNC Press Brake with Cybelec DNC 1200 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Laser Guards, Hydraulic Top Tool Clamping, Side and Rear safety Fences, Tooling Carousel. S/No 04430044 (2004)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 4: Edwards Pearson PR6 150 Ton x 4100mm Over Bed CNC Press Brake
Edwards Pearson PR6 150 Ton x 4100mm Over Bed CNC Press Brake with Cybelec DNC 880 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Infra-Red Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No. 99P403P (1999)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 5: Edwards Pearson PR10 150 Ton x 4100mm Over Bed CNC Press Brake
Edwards Pearson PR10 150 Ton x 4100mm Over Bed CNC Press Brake, Including Cybelec DNC 800 6 Axis Control, (Y1, Y2, X, Z1, Z2, R) Auto Crowing, Infra-Red Guards, Hydraulic Top Tool Clamping, Side & Rear Safety Fences, Tooling Carousel. S/No. 97P287 (1997) (Spares or Repairs)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6: Tooling Carousel
Tooling Carousel
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 7: RAS Type 73.40 Flexibend 4000mm x 2.5mm Capacity High Speed CNC Folder
RAS Type 73.40 Flexibend 4000mm x 2.5mm Capacity High Speed CNC Folder with System 5000 CNC Control System, ‘J’ Shape Back Gauge with 4000mm Reach, Max Bending Angle 180 deg, Full Length Segmented Goats Foot Top Tooling, (2) x Sets of Segmented Bottom Tools (10mm and 25mm wide), Infra-Red Operator Guarding (2001)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8: Edwards Pearson VR 4080mm x 10mm Capacity Hydraulic Variable Rake Guillotine
Edwards Pearson VR 4080mm x 10mm Capacity Hydraulic Variable Rake Guillotine with Cybelec DNC 10 Control, Auto Blade Gap Adjustment, Heavy Duty Rear Sheet Support System with Integrated Conveyor, (1) x 4000mm Squaring Arm, 3 x 2000mm Sheet Supports, Rear Infra-Red Safety Guarding. S/No. 970633 (1997)
Please Note: This lot has an extended clearance date of 30th April 2020.
Please Note: This lot is located in York. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.