2505 - Conventional Equipment, Ancillary Items and Tooling no longer required by CMP and Others

Engineering

L'enchère s'est terminée le

2016-08-23 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: The majority of these Items are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Please Note: Lots 1A & 1B are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Please Note: Lots 4A, 5A, 11A, 12A & 25A are located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

 

 

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2016-08-25 17:00:00.0

'Date limite d''apurement'

2016-09-08 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 1-10 de 118

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
23 août 2016 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 1: Boko F30 Milling Machine

Boko F30 Milling Machine with Heidenhain 425 Control, Table Size: 63" x 47", Max Workpiece Diameter: 153", Max Workpiece Height: 38.6", Spindle Speeds: 35.5 - 1,800rpm.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

 

Preview image
Fin:
23 août 2016 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 1A: Union Type BFT 80/2 Horizontal Boring & Milling Machine

Union Type BFT 80/2 Horizontal Boring & Milling Machine. Table 1130mm x 1000mm. Spindle Diameter 80mm. Facing Head Diameter 500mm. Traverses: X 1600mm, Y 1000mm, Z 1250mm. With Tail Stock (End Support). Line Boring Bars.

Please Note: This Item is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 août 2016 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 1B: Poreba Type TPK 80/2m Gap Bed Centre Lathe

Poreba Type TPK 80/2m Gap Bed Centre Lathe, Swing Over Bed 30", Swing Over Gap 40", 2000mm between Centres,  Spindle Bore 3 3/4", Spindle Speeds: 8 - 800rpm, 25" 4-Jaw Drive Plate, 3-Point Roller Steady, Fixed Traveling Steady.

Please Note: This Item is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 août 2016 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 2: Tarnow Gap Bed Centre Lathe

Tarnow Gap Bed Centre Lathe, 416mm Swing x 1500mm between Centres, 3 & 4-Jaw Chucks, 4-Way Toolpost, 2 & 3-Point Steadies. S/No. 416 (1979)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

Preview image
Fin:
23 août 2016 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 3: Smart & Brown Centre Lathe

Smart & Brown Centre Lathe with 3-Jaw Chuck & Collets

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

Preview image
Fin:
23 août 2016 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 4: Britan Capstan Lathe with Barfeed

Britan Capstan Lathe with Barfeed

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

Preview image
Fin:
20 sept. 2016 14:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 203: Boko F30 Milling Machine

Boko F30 Milling Machine with Heidenhain 425 Control, Table Size: 63" x 47", Max Workpiece Diameter: 153", Max Workpiece Height: 38.6", Spindle Speeds: 35.5 - 1,800rpm.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

 

Preview image
Fin:
23 août 2016 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 4A: Shape Omega Index Punching Machine

Shape Omega Index Punching Machine with Delta 20 CNC Control & Qty Punches

Please Note: This Item is located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
23 août 2016 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 5: Myford HA Plain Cylindrical Grinder

Myford HA Plain Cylindrical Grinder with Coolant Clarifier Unit. S/No. 81508CB

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

 

Preview image
Fin:
23 août 2016 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 5A: MEP Model Shark 280SX Horizontal Bandsaw

MEP Model Shark 280SX Horizontal Bandsaw

Please Note: This Item is located in High Wycombe and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories