2462 - CNC Conventional & Fabrication Equipment no longer required due to the reorganisation at Dunham Manufacturing Co Ltd, Skelmersdale and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Items are located at Chesterfield, Halifax, Haslingden, Hyde and Knowsley. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-19 de 19
Lot 11: Edwards Pearson Model RTA/30T 30 Ton x 1500mm Over Bed Downstroke Hydraulic CNC Press Brake
Edwards Pearson Model RTA/30T 30 Ton x 1500mm Over Bed Downstroke Hydraulic CNC Press Brake with Cybelec Euro 111, 3 Axis Control (X, Y1, Y2), Machine mounted operator guards, Side & Rear Fences, Foot Pedal Control, Limited Tooling and Top Clamps. S/No. 0121 (2001)
Please Note: This Item is located in Hyde, Unfortunately there are no loading facilities available on site. The lot would need skating and lifting out from current position
Lot 12: Amada Model CSW 220 200mm x 3.2mm Hydraulic Notching Machine
Amada Model CSW 220 200mm x 3.2mm Hydraulic Notching Machine
Please note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 13: Denford Novaturn 2 Axis CNC Training Lathe
Denford Novaturn 2 Axis CNC Training Lathe, distance between centres 270 mm, Swing over bed 160 mm, Swing Over Cross Slide 80 mm, Travel (X Axis) 140 mm, Travel Z Axis 225 mm, Spindle Bore 21 mm, Quick Change Toolpost, 3 Jaw Chuck, Totally Enclosed High Vis’ Interlocked Guard, Spindle Motor 1.5hp, 220/24 Volts, Single Phase
Please Note: This Item is located in Knowsley. Items which are colleted by a pallet company will be charge at £60 per item for packing, palletising and labelling.
Lot 14: Denford Novamill 3 Axis CNC Vertical Milling Machine
Denford Novamill 3 Axis CNC Vertical Milling Machine, Table Size 360 x 130 mm, Long' Travel (X) 225 mm, Cross Travel (Y) 150 mm, Head Travel (Z) 115 mm, Machineable area 225 x 115 mm, Spindle To Table 180 mm, Spindle to column 110 mm, Spindle Speeds 5000 RPM, Spindle Taper ISO30, 2 Tee Slots 10mm x 50 mm Centres, Machine Enclosed in Interlocked Safety Box (900 x 890 x 660 mm High), Separate Control Box, Motor Size 0.5hp, 220/240 Volts, Single Phase, 50hz, Weight 170kgs
Please Note: This Item is located in Knowsley. Items which are colleted by a pallet company will be charge at £60 per item for packing, palletising and labelling.
Lot 15: SIP 20KVA 415V A.C Spot Welder
SIP 20KVA 415V A.C Spot Welder
Please note: This Item is located in Knowsley and will
be loaded to a suitable vehicle free of charge however blocking and
securing will be at the cost of the
purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 16: Bomar Model STG 230 GA 500 Automatic Horizontal Bandsaw
Bomar Model STG 230 GA 500 Automatic Horizontal Bandsaw, Capacities 230 mm rounds, 280 x 230 mm Rectangles with Mitre Cutting to 60 Degrees (1999)
Please Note: This Item is located in Halifax and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Lot 17: Colchester Mastiff 120” Between Centres Gap Bed Centre Lathe
Colchester Mastiff 120” Between Centres Gap Bed Centre Lathe
with 3 & 4 Jaw Chucks,
Fixed and Moving Steadies, Catch Plate & Large Face
Plate
Please Note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight
Lot 18: Asquith OD1 72” Radial Drilling Machine
Asquith OD1 72” Radial Drilling Machine with Box Table and Insta-brake
Please Note: This Item is located in Knowsley and will need a low-loader only due to height of machine.
Lot 19: 2000mm x 1.5mm Weight Assisted Box Pan Folding Machine
2000mm x 1.5mm Weight Assisted Box Pan Folding Machine with Full Length Segmented Tooling
Please Note: This Item is located in Knowsley and will be loaded to a suitable vehicle free of charge however blocking and securing will be at the cost of the purchaser.
Please Note: Curtain sided vehicles are not suitable when weight of machine is greater than 1 Ton in weight