2381 - Okuma MA 60 HB Horizontal FMS Machining Cell, CNC Milling, Turning & Manual Machine Tools Available due to restructuring within a multinational precision engineering group

Engineering

L'enchère s'est terminée le

2015-04-23 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Cornwall - Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

 

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2015-04-27 17:00:00.0

'Date limite d''apurement'

2015-05-07 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 11-20 de 28

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
23 avr. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 11: Makino MC86 Multi Pallet Horizontal Machining Centre with Fanuc 11M Control

Makino MC86 Multi Pallet Horizontal Machining Centre with Fanuc 11M Control, 630mm x 630mm Pallet Size, 1° Indexing , 120 Station ATC, BT50 Spindle, Swarf Conveyor.  S/No. A63 – 103 (1987)

Please Note:

Pallet Change does not function in automatic mode

This lot will have 60 random Toolholders and a Qty of Random additional pallets

Any Toolholders, Tooling, Machining Cubes, Jigs & Fixtures that may be shown in the photographs however are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 17: Qty of BT 50 Toolholders

Qty of BT 50 Toolholders

Please Note:

Excluding Storage Rack and Any Front End Tooling Shown

This Item is located in Cornwall

Preview image
Fin:
23 avr. 2015 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 18: Trimos Toolsetter 50 INT Taper

Trimos Toolsetter 50 INT Taper. S/No. 442

Please Note: This Item is located in Cornwall

Preview image
Fin:
23 avr. 2015 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 20: Makino FNC 74-A20 Vertical Machining Centre with Fanuc 6m Control

Makino FNC 74-A20 Vertical Machining Centre with Fanuc 6m Control 900mm x 450mm Table, BT40 Spindle, 20-Station ATC

Please Note:

The ATC does not function

The Toolholders (Not Cutting Tools or Tool Racks) will be included with this lot

The chuck and vice shown on the table are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 21: Victor VT Plus 15 CNC Lathe with Fanuc OT Control

Victor VT Plus 15 CNC Lathe with Fanuc OT Control, Collet Chuck, 12-Station Turret, Parts Catcher, Iemca VIP 70 Short Magazine Bar Feed, Swarf Conveyor

Please Note:

The Tooling blocks shown bolted to the turret are included.

Any Cutting Tools and Back Ends shown however are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 22: Okuma LB 25 CNC Lathe with OSP 5000L Control

Okuma LB 25 CNC Lathe with OSP 5000L Control, 250mm dia chuck, 10-Station Turret, 8 Random Toolholders, Tooleye, Tailstock & Swarf Conveyor. S/No. 0610-0073

Please Note:

Any tooling and VD1 Holders shown are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 23: Okuma LB15 II CNC Lathe with OSP 7000L Control

Okuma LB15 II CNC Lathe with OSP 7000L Control, 250mm dia chuck, 12-Station Turret, 8 Random Toolholders, Tooleye, Tailstock, Swarf Conveyor, Iemca VIP 70 Short magazine Bar Feed. S/No. 3932 (1997)

Please Note: This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 24: Okuma LB15 II CNC Lathe with OSP 7000L Control

Okuma LB15 II CNC Lathe with OSP 7000L Control, 250mm dia chuck, 12-Station Turret, 8 Random Toolholders, Tooleye, Tailstock, Swarf Conveyor. S/No. 2838 (1996)

Please Note:

Any Tooling and VDI Holders shown are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 25: Okuma LR15 CNC Lathe with OSP 500L-G Control

Okuma LR15 CNC Lathe with OSP 500L-G Control, 250mm dia chuck, twin turrets, 10-station upper, 8-station lower, 8 Random Toolholders, Tooleye, Iemca Kid 70 Short Magazine Bar Feed. S/No. 6301.0318

Please Note:

Any Tooling and VDI Holders shown are not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Fin:
23 avr. 2015 15:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 26: Pollard Pillar Drill

Pollard Pillar Drill, No I MT Spindle 24’’ x 15’’ Table

Please Note:

Chuck shown is not included with this lot

This Item is located in Cornwall, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories