2350 - Final Meister Auction Consisting of Engineering Ancillaries, Inspection & General Workshop, Assembly Equipment & Office Equipment previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium without reserve
Engineering
L'enchère s'est terminée le
2014-10-30 13:00:00.0
Temps restant
Enchère terminée
'Description de l''enchère'
Location: These Items are located in Sprimont, Belgium
The Items in this auction are for sale without reserve
Auction is held at 13:00 (UK Time) - 14:00 (CET Time)
A sole contractor has been appointed to disconnect and load for many items in this auction - please see full details in the 'specific conditions' under the notice to purchasers section
Please Note: Loading prices are mandatory for particular lots - Please take these prices into consideration when bidding.
Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32
Mobile: + 32 474
93 02 51
Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu Website:
www.ddm.eu
In case of a self pick up please contact Andreas Liebmann;
Tel: + 49 16 36 79 38 58
Email: Aliebmann@hilcoglobal.com
VAT Reverse Charges apply to this auction
This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 0.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
2014-11-03 17:00:00.0
'Date limite d''apurement'
2014-11-27 17:00:00.0
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 110
Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 0-10 minutes suivant l'heure de fin de l'article.
Fin:
30 oct. 2014 13:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 38: Schaublin 102 CNC Platern Lathe with Siemens Control
Schaublin 102 CNC Platern Lathe with Siemens Control. S/No. 330506
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €590, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Fin:
30 oct. 2014 13:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 40: Kadia TPH60/250T 15-Station Honing Machine with Unipos UCP1000 Control
Kadia TPH60/250T 15-Station Honing Machine with Unipos UCP1000 Control. S/No. 50/1884 (2001), (5) Vertical Main, (8) Small Vertical, (2) 4-Station Drills, (2) Small Horizontal, Round Track Feed, Bowl Feed, Pick & Place Robot, Nedermann Mist Extractor
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €3305, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Fin:
30 oct. 2014 13:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 41: Kadia 4PH60/250T 11-Station Honing Machine with Unipos UCP1000 Control
Kadia 4PH60/250T 11-Station Honing Machine with Unipos UCP1000 Control. S/No. 50/1825, (4) Vertical Hones (main), (2) Small Horizontal, (1) 4-Station Drill, (6) Small Vertical, Bowl Feed, Pick & Place Robot, Track through Feed, Nedermann Mist Extractor (1999)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €2905, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Fin:
30 oct. 2014 13:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 63: Schaublin 120-TO Lathe
Schaublin 120-TO Lathe. S/No. 181
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €250, Please Note this price does not include packing or strapping - This is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Fin:
30 oct. 2014 13:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 65: Triumph Pedestal Drill
Triumph Pedestal Drill
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to
a suitable vehicle is €100, Please Note this price does not include
packing or strapping - This is at the responsibility of the buyer.
This can be done by DDM at extra cost if required
This Item can also be picked up by the buyer themselves on
site in Sprimont however the Buyer has to ensure they have the
relevant insurance policies in place and meets with all the Health
& Safety criteria, provide the correct equipment to do so and
man power if needed for the pickup
Fin:
30 oct. 2014 13:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 68: Nederman Extractor
Nederman Extractor. S/No. 663 603263
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer. This can be done by DDM at extra cost if required
Fin:
30 oct. 2014 13:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 73: Loc Electric Manuloc 27 Pedestrian Pallet Truck
Loc Electric Manuloc 27 Pedestrian Pallet Truck. S/No. 29314 (1992)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to
a suitable vehicle is €150, Please Note this price does not include
packing or strapping - This is at the responsibility of the buyer.
This can be done by DDM at extra cost if required
This Item can also be picked up by the buyer themselves on
site in Sprimont however the Buyer has to ensure they have the
relevant insurance policies in place and meets with all the Health
& Safety criteria, provide the correct equipment to do so and
man power if needed for the pickup
Fin:
30 oct. 2014 13:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 76: Loc Electric Type Euroloc EU-130-FR-560 Pedestrian Pallet Truck
Loc Electric Type Euroloc EU-130-FR-560 Pedestrian Pallet Truck. S/No. 80587 (AL) (1999)
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this item to
a suitable vehicle is €150, Please Note this price does not include
packing or strapping - This is at the responsibility of the buyer.
This can be done by DDM at extra cost if required
This Item can also be picked up by the buyer themselves on
site in Sprimont however the Buyer has to ensure they have the
relevant insurance policies in place and meets with all the Health
& Safety criteria, provide the correct equipment to do so and
man power if needed for the pickup
Fin:
30 oct. 2014 13:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 102: Arbour Press
Arbour Press
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this
item to a suitable vehicle is €65, please note this price does not
include packing or strapping - this is at the responsibility of the
buyer. This can be done by DDM at extra cost if required
This Item can also be picked up by the buyer themselves on
site in Sprimont however the Buyer has to ensure they have the
relevant insurance policies in place and meets with all the Health
& Safety criteria, provide the correct equipment to do so and
man power if needed for the pickup
Fin:
30 oct. 2014 13:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
0.00%
Lot 108: Kef 120mm Double Ended Grinder
Kef 120mm Double Ended Grinder
Please Note: This Item is located in Sprimont, Belgium
Please Note: The Fee for disconnecting and loading this
item to a suitable vehicle is €85, please note this price does not
include packing or strapping - this is at the responsibility of the
buyer. This can be done by DDM at extra cost if required
This Item can also be picked up by the buyer themselves on
site in Sprimont however the Buyer has to ensure they have the
relevant insurance policies in place and meets with all the Health
& Safety criteria, provide the correct equipment to do so and
man power if needed for the pickup
Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking