2266 - Sale of Machinery From Skil Environmental Due to Retirement of Directors & Others

Engineering

L'enchère s'est terminée le

2014-05-06 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: Lots are located at Ashton-Under-Lyne, Cheshire, Huddersfield and Stockport

Lot 7 is located in Huddersfield - This lot will be loaded free of charge to a suitable vehicle

Lots 8, 21 and 34 located at Stockport - Unfortunately there are no loading facilities at this site - Dismantling and Loading will be at the cost of the purchaser

Lot 19 is located in Ashton Under Lyne - This lot will be loaded free of charge to a suitable vehicle

All other lots have been removed for convenience of loading and will be loaded free of charge to a suitable vehicle. These lots are located in Cheshire.

Prime d'acheteur

'La prime d''acheteur sera fixée à 15.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing by Appointment only with the Auctioneer, Please contact our Office on: +44 (0) 121 328 2424

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2014-05-08 17:00:00.0

'Date limite d''apurement'

2014-05-22 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 21-30 de 71

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
06 mai 2014 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 22: Labor Gap Bed Centre Lathe

Labor Gap Bed Centre Lathe, 450mm Swing over bed, Quick Change Toolpost, 650mm Swing in Gap, 2100mm Between Centres. 75mm Spindle Bore, 3 & 4 Jaw Chucks, Fixed & Travelling Steadies

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 23: Imatec ID-175 Centre Lathe

Imatec ID-175 Centre Lathe, Quick Change Toolpost, 14" Swing over bed, 40" Between Centres, 1 5/8" Spindle Bore, Speeds 60 to 1600 rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 24: Colchester Triumph 2000 Gap Bed Centre Lathe

Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres, 2 1/8" Spindle Bore, Speeds 25-2000 rpm, Imperial leadscrew & Dials, Quick change toolpost & holders, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 25: Harrison M250 Trainer CNC/Manual Lathe

Harrison M250 Trainer CNC/Manual Lathe with Harrison CNC System, 11" Swing over bed, 30" Between Centres

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 26: Colchester Chipmaster Variable Speed Centre Lathe

Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed, 20" Distance Between Centres, 1.3/8" Spindle Bore, Spindle Speeds: 35-3000rpm, Motor Size 3HP, 3 Jaw Chuck, Quick Change Toolpost, 2 & 3 Point Steadies

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 27: Herbert 4 Capstan Lathe

Herbert 4 Capstan Lathe, 2" Spindle Bore, Collet Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 28: Ward 2DB Capstan Lathe

Ward 2DB Capstan Lathe, 6 1/2" Centre Height. 1 5/8" Spindle Bore. 60-2520 rpm Spindle Speeds. 11 1/4" Sliding Sadle along bed, Metric Dial, Collet Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 29: Ward No.2 Scholar Capstan Lathe

Ward No.2 Scholar Capstan Lathe, Collet Chuck, Dual Dials, with Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:50:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 30: Pearson Hydraulic Power Guillotine

Pearson Hydraulic Power Guillotine, Capacity 3048mm x 10mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Fin:
06 mai 2014 15:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
15.00%
Taux de TVA:
20.00%

Lot 31: Rhodes Hoan Hydraulic Press Brake

Rhodes Hoan Hydraulic Press Brake, 300mm Length x 100 Ton Capacity, Top and Bottom Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories