Mazak Integrex E – Tower 1060VII CNC Turning/Milling Machine with Mazatrol Matrix Voice Control, Tooleye, 5-Axis Head, X,Y, Z, B, C Axes, Twin Pallet each with 1m Chuck, Renishaw Probe, Swarf Conveyor, 120 Station Tool Changer, Tipping Skip, S/No. 198592 (10/2007)

Tooling included with the sale of this machine; 15 x Capto Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot.

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions ...

Hankook VTC160E Vertical Turning Centre with Fanuc 3Li Control, A, X, Z, U, W, Axes, 1600mm Chuck, Auto Clamp, 2m Swing, 1.4m Height, ATC 24 Tools, Tooleye, Swarf Conveyor, S/No. 42009215 (2011)

Tooling included with the sale of this machine; 9 x Turning Tools & 10 x BT50 Tools

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding ...

Axe & Status Massa VL 1200 ATG - 0 Vertical Lathe with Fanuc 18i TB Control, 1200mm Chuck, X, Y, C Axes, ATC 24, 6 Tools, S/No. 2540 (03/2008)

Tooling included with the sale of this machine; 6 x pieces of Rigid Tooling & 4 x Auto Clamps

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday 7th December 2016 at 1pm ...

Doosan VTS 1620M Vertical CNC Lathe with Fanuc i Control, Chuck Size 1.6m, 24-ATC Tool Changer, 17 Tools, Swarf Conveyor, Tipping Skip, S/No. VT160M0022 (08/2011)

Tooling included with the sale of this machine; 15 x Pieces of Rigid Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding Ends on Wednesday ...

Doosan VTS 1620M Vertical CNC Lathe with Fanuc i Series Control, X, Y, C Axes, Chuck Size 1.6m, 24-Station Tool Changer, Swarf Conveyor, Tipping Skip, S/No. MT0038000032 (01/2012)

Tooling included with the sale of this machine; 10 x Pieces of Rigid Tooling, 1 x 4 Jaws, 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

We have further auctions of tooling suitable for this machine - Bidding ...

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Probe, 2m Table, 24 Station ATC, FSE Swarf Management, Chuck Size 1.6m, Swarf Conveyor, Tipping Skip, S/No. MT0038-000060 (05/2013)

Run Time: 4761 hours, 32 mins. Cutting Time: 3400 hours, 18 mins

Tooling included with the sale of this lot; 16 pieces of Rigid Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will ...

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Tool Sensor, FSE Management System, Chuck Size 1.6m, 24 Station ATC, S/No. MT0038-000081 (03/2014)

Tooling included with the sale of this machine; Qty 11 x Standard Tooling, 1 x 4 Jaws & 1 x 3 Jaws

Run Time: 1382 hours, 3 mins. Cutting Time: 1104 hours, 40 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. ...

Doosan Puma VTS1620M Vertical Turning Centre with Fanuc i Series Control, X, Z, A, C Axes, Tool Sensor, FSE Management System, Chuck Size 1.6m, 24 Station ATC, S/No. MT0038-000084 (07/2014)

Tooling included with the sale of this machine; Qty 10 x Standard Tooling, 1 x 4 Jaws, 1 x 3 Jaws

Run Time: 1600 hours, 3 mins. Cutting Time: 964 hours, 2 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. ...

Doosan VT900 2SP Vertical Turning Centre with Fanuc 3Li Control, Swarf Conveyor, Filtermist, X & Y Axes, (2) 32" Chucks, (2) 12 Station Turrets, Tooleye, Tipping Skip, S/No. MT0030-001051 (03/2014),

Tooling included with the sale of this machine; Qty of Standard Tooling and Qty of Jaws

Run Time: 273 hours, 17 mins. Cutting Time: 230 hours, 29 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. ...

Doosan Puma 700 XLM CNC Turning Centre, 5m between Centres, X, Z Axes, 32" Chuck, 800mm 4-Jaw Chuck, Tooleye, Swarf Conveyor. S/No. ML0167-000051 (12/2013)

Tooling included with the sale of this machine; 1 x K5-MSW Hydraulic Steady - Range; 80 - 390. S/No. 0633, 1 x K5-MSW Hydraulic Steady - Range; 80 - 390. S/No. 0647, 1 x Telbrook T-12063 Steady - Range; 390 - 700, 2 x Live Tooling, Qty Standard Tooling & 2 x Sets of Jaws

Run Time: 129 hours, 44 mins. Cutting Time: 3109 hours, 56 mins

Please Note: Any tooling included with this lot will be shown in the description and photographed in lot boxes. Any other tooling shown in the photographs is specifically not included with this lot

Please Note: This Lot is located in Newcastle ...