3305 - Last Remaining Items; 3 x Schumag Bright Bar Drawing Lines & 100t Aetna Standard Draw Bench and Processing Equipment due to frustrated Export

Engineering

Auction ended on

2024-05-08 15:00:00.0

Time left

Auction finished

Buyer's premium

Buyer's Premium will be charged at 18.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2024-05-10 17:00:00.0

Final clearance date

2024-05-23 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 82

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot * : Combination of lots 1A, 1B, 1C, 1D & 1E

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling, Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector, Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Operator Control Panel, ...

Lots in this combination

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

Lot # Description
Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 1A: Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999)

Pangborn 4 Wheel 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector Pangborn 4-Wheel, 30KW & 25KW Motors, 21M Through-Feed Shot Blast Line (1999), Wheel Blast Cabinet, 48” width Entry and Exit Roller Conveyor, Dust Collector

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 1A, 1B, 1C, 1D & 1E

Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 1B: 100 Ton Aetna Standard Bar Draw Bench

100 Ton Aetna Standard Bar Draw Bench; Single Chain, Single & Double Draw; Max Draw length 9m; Max draw diameter 5” Square/Hex, Min/max 2”-16” Rounds, Max 16” x 2.5” Rectangle, Equipped with built in hydraulic push pointer, entry descrambling and roller feed table, Transfer Conveyor and Stacking Table, Aetna Standard Gearbox; Main DC Motor 275kW, 420Volt, 323rpm; Main Control Console & Electrics Updated 2008/09, Spare Die Blocks & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 1A, 1B, 1C, 1D & 1E

Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 1C: Missler Model DEB-540CE Bandsaw

Missler Model DEB-540CE Bandsaw, 540 x 540 mm Capacity (2006), Entry & Exit Roller Conveyor, Flat Screen Open Control Panel

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 1A, 1B, 1C, 1D & 1E

Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 1D: Scraven 100-Ton Anvil Bumper

Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 1A, 1B, 1C, 1D & 1E

Preview image
Ends:
09 May 2024 05:30:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 1E: Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener

Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 1A, 1B, 1C, 1D & 1E

Preview image
Ends:
09 May 2024 00:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot * : Combination of lots 4A, 4B & 4C,

Schumag/Casa Grande IIBF, Flat Bar Drawing Line, 12mm – 30mm x 12-Ton Pull Capacity, including Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator. Milling Type Pointer, Horizontal/Vertical Pre Straightening, Vogel & Schumann 4-Wheel (35KW) Shot Blast, Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Lots in this combination

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

Lot # Description
Preview image
Ends:
09 May 2024 00:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 4A: Casa Grande Double Decoiler

Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator, Milling Type Pointer, Horizontal/Vertical Pre Straightening

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 4A, 4B & 4C,

Preview image
Ends:
09 May 2024 00:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 4B: Vogel & Schumann 4-Wheel (35KW) Shot Blast

Vogel & Schumann 4-Wheel (35KW) Shot Blast

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 4A, 4B & 4C,

Preview image
Ends:
09 May 2024 00:20:00 BST
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
20.00%

Lot 4C: Schumag IIBF Flat Bar Drawing Machine

Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Crack Detector, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Please note this lot is also offered as a combination lot

The "Combination Lots" mechanism gives our customers a simple way to place a bid on a number of related items, if you want to understand better click here

* : Combination of lots 4A, 4B & 4C,

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories