2882 - Doosan, Daewoo, Hurco & Mori Seiki CNC Lathes, Mazak, Huron and Mecal Machining Centres plus Toolroom Ancillaries

Doosan 670L 2 Axis CNC Lathe with Fanuc 18i-TB CNC Control, Swing Over Bed 910mm, Swing Over Saddle 670mm, Maximum Distance Between Centres 1850mm, Maximum Turned Length 1800mm, Spindle Speeds 15 – 1500rpm, Spindle Bore 152mm, Feeds 0.001 – 500mm/rev, Rapids 16m/min, Complete With 12 Position Turret, Tool Probing, 2 Point Hydraulic Steady, Swarf Conveyor, Approximate Dimensions 5150 x 2355 x 2150mm, Approximate Weight 14,000kg. S/No. LNL-1056 (2005)

Please Note: This lot is located in Leicester. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any ...

Daewoo Puma 2500Y CNC Lathe with Fanuc 18i-TB Control, 600mm Swing, 330mm Max Turned Diameter, 750mm Between Centres, 500mm Maximum Cutting Length, 12-Station Turret, 76mm Bar Capacity, 3500rpm 22KW Spindle, C Axis & Y Axis, 3-Jaw Chuck, Coolant, Swarf Conveyor, Tool Setter, Parts Catcher, Static and (6) Driven Tool Holders, Ball Puller, Set of Chuck Jaws, Manuals (2003)

Please Note: This lot is located in Leicester. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mori Seiki MT2000S  Multi Axis CNC Lathe with Mori MSX 501 III Control, 548mm Max. Machining Diameter, 1018mm Max Turning Length, 4500rpm Main Spindle, 6000rpm Sub Spindle, 63.5mm Bar Capacity, 60-Station ATC,  8000rpm Milling @ 10Hp, 20Hp Spindle Motors,  2 x Collet Chucks, Y axis +/- 80mm, Swarf Conveyor, Hydrafeed Multifeed Barfeed (2001)

Please Note: This lot is located in Leicester. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mazak Nexus 510C Vertical Machining Centre with Mazatrol 640M Nexus Control, 4th Axis, Traverses: X Y Z: 1049 x 528 x 528mm, Table: 1300 x 550mm, Spindle Speed: 0 - 12000 rpm, Spindle Taper: DIN40, Spindle Motor: 18.6kW, 30 Station ATC, Swarf Conveyor, Through Spindle Coolant, Low Volt Light (2005)

Please Note: This lot is located in Leicester. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Huron K2X 10 3-Axis Vertical Machining Centre with Heidenhain 530 Control, Traverses: X Y Z 1000 x 800 x 500mm, Table Size: 1150 x 800mm, Table Load: 1,000 kgs, Spindle Speed: 18,000rpm, Spindle Taper: HSK 63, Rapid Federate 60m/min Power 30KW, 36-Station ATC, Swarf Conveyor (2011)

Please Note: This lot is located in Leicester. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mecal MC304 Ariel 4-Axis Machining Centre with Kvara Control, Traverses X Y Z: 12,500 x 650 x 200mm, Spindle Speed: 18,000rpm, Spindle Motor: 5.5kW, , Rapid Feed: XYZ axis 80 x 60 x 40m/min, Spindle Taper: DIN30, 12-Station ATC, +/- 90 degrees Spindle Head, 15 off Pneumatic Vices (2008)

Please Note: This lot is located in Dudley. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

HAAS TM-2HE CNC Milling Machine with HAAS Control, Traverses X Y Z: 1016 x 500 x 600mm, Table Size: 1530 x 305mm, Spindle Speeds: 500 - 4200rpm, BT40 Taper, 7.5Hp Spindle Motor, HAAS Control, Low Volt Light, Coolant (12/2006)

Please Note: This lot is located in Leicester. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco TM8 CNC Lathe with Hurco WinMax Control, 356mm Max. Cutting Diameter, 483mm Max Turned Length, 335mm Max Swing, 4,800rpm Spindle Speed, 52mm Bar Capacity, 10-Station Block Turret, 16kW Spindle Motor, 203mm 3-Jaw Chuck, Tailstock, Tool Setter, Swarf Conveyor (2006)

Please note; There are no Cutting Tools included with this lot

Please Note: This lot is located in Leicester. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mec-Wash Unit

Please Note: This lot is located in Leicester. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

LNS Hydrobar Sprint 565 Automatic Barfeed, 65mm Bar Capacity, 3.7m Max Bar Length (2010)

Please Note: This lot is located in Leicester. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.