2872 - Bridgeport, Doosan, Hitachi Seiki, XYZ, Mazak Machining Centres and Lathes, Spark Eroders, Drills and Ancilliary Items no longer required

Engineering

Auction ends on

Tuesday 31 Mar 2020 at 03:00PM (BST)
Add to calendar

Time left

Overtime bidding

Auction description

Please Note: These lots are located in Birmingham, Tamworth, Wolverhampton & Oakham. Please see individual lots for loading information and charges.

Buyer's premium

Buyer's Premium will be charged at 18%.

VAT

Value added tax will be charged at 20%.

Viewing times

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2 Apr 2020 at 17:00 (BST)

Final clearance date

16 Apr 2020 at 17:00 (BST)

Shipping agents

Storage contractors

Lots 1-10 of 73

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
31 Mar 2020 17:00:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
31
Buyer's premium:
18%
VAT rate:
20%

Lot 1: Bridgeport Vertical Machining Centre 2000

Bridgeport Vertical Machining Centre 2000 – 30 XP2 with Heidenhain i TNC 530 Control, 30 Station ATC, Table Size 2300mm x 660mm. S/No. 950767 (2004)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £1,000 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 16:40:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
39
Buyer's premium:
18%
VAT rate:
20%

Lot 2: Doosan DNM 400 II Machining Centre

Doosan DNM 400 II Machining Centre, Table Size 920mm x 430mm, Fanuc I Series Control, 30 Station ATC, Swarf Conveyor. S/No. MB0009-002744 (2014)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £750 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 17:00:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
24
Buyer's premium:
18%
VAT rate:
20%

Lot 3: Doosan Puma V550M CNC Vertical Turning Lathe

Doosan Puma V550M CNC Vertical Turning Lathe with Fanuc 21i-TB Control, C-Axis, Driven Tools, 18” 3-Jaw Chuck, Swarf Conveyor, Coolant Tank. S/No. 3V150201 (2004)

Please Note: This lot is located in Oakham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 15:20:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
6
Buyer's premium:
18%
VAT rate:
20%

Lot 3A: Miyano BND42S5 Twin Spindle CNC Turning Centre

Miyano BND42S5 Twin Spindle CNC Turning Centre with Miyano Fanuc 21 Control, Collet and Chuck, Parts Catcher, Take off Conveyor, 12 Station Turret, Swarf Conveyor, Mobile Swarf Bin. S/No. BD60521S (2000) IEMCA VIP 70 Barfeed. S/No. 0200106Q09 (2001)

Please Note: This lot is located in Wolverhampton, West Midlands. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 16:40:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
12
Buyer's premium:
18%
VAT rate:
20%

Lot 4: Hitachi Seiki HS500 Twin Pallet Horizontal Machining Centre

Hitachi Seiki HS500 Twin Pallet Horizontal Machining Centre with Seicos (Fanuc) 10M Control, CAT40, 12,000rpm Spindle, 1 Degree Indexing ‘B’ Axis, 60 Station ATC, Swarf Conveyor. S/No. HS50014 (1998) (No Probing)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.  All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 17:20:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
5
Buyer's premium:
18%
VAT rate:
20%

Lot 5: XYZ 1020 Vertical Machining Centre

XYZ 1020 Vertical Machining Centre with Siemens Sinumerik Control, Table size 1120mm x 500mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMU00023 (2010 verified by XYZ)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £960 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Please note this lot is also offered as a combination lot

*: Combination of Lots 5 & 5A

Preview image
Ends:
31 Mar 2020 17:20:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
5
Buyer's premium:
18%
VAT rate:
20%

Lot 5A: 4th Axis Unit, 270mm 3 Jaw Chuck & Tailstock

4th Axis Unit, 270mm 3 Jaw Chuck & Tailstock

Please Note: This lot is located in Birmingham, this item will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please note this lot is also offered as a combination lot

*: Combination of Lots 5 & 5A

Preview image
Ends:
31 Mar 2020 17:20:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
49
Buyer's premium:
18%
VAT rate:
20%

Lot *: Combination of Lots 5 & 5A

Combination of Lots 5 & 5A

Lot 5 XYZ 1020 Vertical Machining Centre with Siemens Sinumerik Control, Table size 1120mm x 500mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMU00023 (2010 verified by XYZ)

Lot 5A - 4th Axis Unit, 270mm 3 Jaw Chuck, Tailstock,

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £960 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 16:10:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
41
Buyer's premium:
18%
VAT rate:
20%

Lot 6: XYZ 560 Vertical Machining Centre

XYZ KR MF560 Vertical Machining Centre with Sinumerik Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Back End Tooling. S/No. MF247 (2006)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
31 Mar 2020 17:30:00 BST
Time left:
Bidding ended
Increment:
£250
Bids:
26
Buyer's premium:
18%
VAT rate:
20%

Lot 7: XYZ Vulcan 250 TC MX-1B Lathe

XYZ Vulcan 250 TC MX-1B Lathe with Siemens Sinumerik 828D Control, 12 Station Turret, 250mm 3 Jaw Chuck, Tooleye, Swarf Conveyor, Tailstock, VDI 40 Tooling, (2) x Back End Live Tooling and Centre, Parts Catcher, Sets of Jaws. S/No. 0505069 (2005 verified by XYZ). Multi-feed MX-1B Barfeed. S/No. 5091

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories