2859 - Deckel Maho, HAAS, Hitachi Seiki, Matchmaker & OKK Machining Centres, Mazak & XYZ CNC Lathes, ONA Spark Eroder and Ceruti Radial Drill no longer required

Engineering

Auction ends on

Thursday 6 Feb 2020 at 03:00PM (GMT)
Add to calendar

Time left

Overtime bidding

Auction description

Please Note: These lots are located in Birmingham, Motherwell, Redditch and Watford. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.

Buyer's premium

Buyer's Premium will be charged at 18%.

VAT

Value added tax will be charged at 20%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

10 Feb 2020 at 17:00 (GMT)

Final clearance date

20 Feb 2020 at 17:00 (GMT)

Shipping agents

Storage contractors

Lots 1-10 of 39

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
06 Feb 2020 16:10:00 GMT
Time left:
Bidding ended
Increment:
£1000
Bids:
41
Buyer's premium:
18%
VAT rate:
20%

Lot 1: Deckel Maho DMU 70 EVO Linear 5 Axis Machining Centre

Deckel Maho DMU 70 EVO Linear 5 Axis Machining Centre with Heidenhain ITNC530 Control, Table Size 700mm x 500mm, 18,000 Spindle Speed, 60 ATC Tools, Laser Tool Setting, SK Tooling, Touch Probe DMG TS 649, Swarf Conveyor, Swarf Management System. S/No. 15455719694 (2009)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £500 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 15:10:00 GMT
Time left:
Bidding ended
Increment:
£500
Bids:
48
Buyer's premium:
18%
VAT rate:
20%

Lot 2: Haas VF 4SS Vertical Machining Centre

Haas VF 4SS Vertical Machining Centre with Haas Control, Table size 52" x 19 1/2", 24 Station Tool Changer. S/No. 1136453 (01/2017)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 16:30:00 GMT
Time left:
Bidding ended
Increment:
£500
Bids:
18
Buyer's premium:
18%
VAT rate:
20%

Lot 3: Haas VF-2 Vertical Machining Centre

Haas VF-2 Vertical Machining Centre with Haas Control, 4th Axis, Table Area: 914 x 356mm, X: 762mm, Y: 406mm, Z: 508mm, Spindle Taper: BT40, Spindle Speeds: to 7500rpm, Motor: 20hp (2005)

Please Note: This lot is located in Motherwell.  A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 16:00:00 GMT
Time left:
Bidding ended
Increment:
£500
Bids:
24
Buyer's premium:
18%
VAT rate:
20%

Lot 4: Haas VF3 Vertical Machining Centre

Haas VF3 Vertical Machining Centre with Haas Control, 4th Axis, Table Area: 1219 x 457mm, X: 1016mm, Y: 508mm, Z: 635mm, Spindle Speed: 7500rpm, Spindle Taper: BT40, Motor: 20hp, 20 Station Tool Changer. (2002)

Please Note: This lot is located in Motherwell. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 16:40:00 GMT
Time left:
Bidding ended
Increment:
£250
Bids:
48
Buyer's premium:
18%
VAT rate:
20%

Lot 5: Haas TM-1P Vertical Machining Centre

Haas TM-1P Vertical Machining Centre with Haas Control, Table Size 1210mm x 270mm, 10 Station Tool Changer, BT40 Back End Tooling. S/No. 1101764 (01/2013)

Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £650 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Preview image
Ends:
06 Feb 2020 15:40:00 GMT
Time left:
Bidding ended
Increment:
£500
Bids:
11
Buyer's premium:
18%
VAT rate:
20%

Lot 6: Matchmaker Vertical Machining Centre 820

Matchmaker Vertical Machining Centre 820 with Fanuc OI-MD Control, Table Area: 950mm x 450mm, X: 820mm, Y: 520mm, Z: 510mm, Spindle Taper: BT40, Spindle Speeds: to 8000rpm, 20 Station Toolchanger. S/No. N432117002 (10/2011)

Please Note: This lot is located in Motherwell. A dismantling and loading onto suitable vehicle charge of £400 which will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 15:20:00 GMT
Time left:
Bidding ended
Increment:
£500
Bids:
19
Buyer's premium:
18%
VAT rate:
20%

Lot 7: OKK HM-40 Horizontal Twin Pallet Machining Centre

OKK HM-40 Horizontal Twin Pallet Machining Centre with Fanuc 16i-M Control, Pallet Size 400 x 400mm, Full B Axis with 0.001 deg Table, 60 ATC, Renishaw MI 12 Interface (No Probe Included), High Pressure Through Spindle Coolant, BT40 Spindle Taper, 6,000rpm Spindle, Spare Spindle, Coolant Tank, Swarf Conveyor, (37) BT40 Toolholders (Back End Only), Machine Weight 9100kgs. S/No. 326 (1999) Manuals

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £450 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Ends:
06 Feb 2020 17:10:00 GMT
Time left:
Bidding ended
Increment:
£250
Bids:
4
Buyer's premium:
18%
VAT rate:
20%

Lot 8: Lagun Future 1800 Milling Machine

Lagun Future 1800 Milling Machine with Heidenhain TNC 360 Control, Table size 1.8m x 700mm, ISO 50 Back End Tooling, Cabinet with Tooling. S/No. 10044 (1998)

Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £2100 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Please note this lot is also offered as a combination lot

*: Combination of lots 8 & 8A

Preview image
Ends:
06 Feb 2020 17:10:00 GMT
Time left:
Bidding ended
Increment:
£25
Bids:
6
Buyer's premium:
18%
VAT rate:
20%

Lot 8A: Qty 50 International Tooling

Qty 50 International Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please note this lot is also offered as a combination lot

*: Combination of lots 8 & 8A

Preview image
Ends:
06 Feb 2020 17:10:00 GMT
Time left:
Bidding ended
Increment:
£250
Bids:
28
Buyer's premium:
18%
VAT rate:
20%

Lot *: Combination of lots 8 & 8A

Combination of lots 8 & 8A

8. Lagun Future 1800 Milling Machine with Heidenhain TNC 360 Control, Table size 1.8m x 700mm, ISO 50 Back End Tooling, Cabinet with Tooling. S/No. 10044 (1998)

8A. Qty 50 International Tooling

Please Note: This lot is located in Redditch. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £2100 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.

Lots in this combination

Lot # Description
Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories