2596 - CNC, Toolroom and Fabrication Equipment no longer required by H&C Cardiem Ltd, Goodman Metal Works & Others

Butler HiPower HD30 Elgamill 3-Axis CNC Bed Type Milling & Boring Machine with Heidenhain Model 410 Control, BT50 Spindle Taper, Bed Area 8000 mm x 1200 mm, Longitudinal Traverse 6150 mm, Vertical Traverse 1650 mm, Cross Traverse 860 mm with Universal Milling Head. S/No. 27733B.

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Devlieg 43H72 DC Spiromatic Jig Mill Horizontal Boring & Milling Machine, Spindle Diameter 4” ISO 50 Taper, Table Area 72” x 35”, Longitudinal Traverse 72”, Vertical Traverse 60”, Cross Traverse 43” with Phillips 3-Axis Control. S/No. 2-14490 DC

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Union 110/6 Horizontal CNC Boring Machine with Heidenhain 360 3 Axis Control (Retrofitted), Spindle Diameter 110 mm, ISO 50 Taper, Table Size 2000 mm x 1600 mm, Longitudinal Traverse 2000 mm, Vertical Traverse 1600 mm, Cross Traverse 200 mm Including Table Indexing (B Axis). S/No. 11339

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Amada Promecam ITPS100 Ton x 3050 mm Over Bed, Upstroke Hydraulic CNC Press Brake with EMA 3 Axis Control (X,R,Y), Sick Machine Mounted Operator Guards, Side and Rear Fences, Foot Pedal Control. S/No. ITPS 100 30 P01111. New Encoder Required for ‘R’ Axis.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Trumpf Trumatic 120 Rotation Compact CNC Sheet Metal Working Machine for Punching, Profiling and Forming, Cutting Force 150kn, Max Sheet Thickness 4.5mm, Max Punching Diameter 38mm, Working Range 1000 x 1000mm without Repositioning, 1000 x 2000mm with One Repositioning, Trumpf CNC Trumagraph CC 220 Control with Tooling and Toolholders (as Shown), Photo Cell Operator Guards. S/No.330262A

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

EP Hrbm50HV 3 Roll Section Bending Machine (Unused), Hydraulic adj to Top Roll, Shaft Diameter 50mm, 2.2kw Motor with Combination Rolls, Flats on Flat 100 x 15mm, Flats on Edge 60 x 10mm, Angles 60 x 60 x 5mm, Box Section 60 x 60 x 3mm, Separate Foot Pedal Control.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

AJAX AJ40 40mm Capacity Geared Head Drilling Machine, No. 4MT Spindle, Spindle Speeds 56-1000 Rpm, Universal Tee Slotted Table 400mm X 400mm with DC Injection Brake.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

EPASY 1250mm x 6mm Asymmetric Initial Pinch Plate Bending Rolls, Roll Dia 150mm, Power Adjustment to Back Bending Roll, Digital Readout for Back Roll Position, Manual Adjustment to Pinch Roll, Top Roll to Slip, Induction Hardened Rolls, Brake Motor, Foot Pedal Control, Emergency Stop Button on consul and Emergency Trip Wires, Motor 2.2KW

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP RBM10HV Section Bending Machine, Horizontal and Vertical Operation, Manual Adjustment to Top Roll. Shaft Dia 30mm, Foot Pedal Control with Emergency Stop Button Capacity- Flat on Flat 50x10mm min, Dia 400mm and 20 x 5mm Min Dia 160mm.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Keetona 80” X 3/16” Hydraform Universal Bending and Folding Machine, Full Length Segmented Tooling and Qty of Swan-Neck Tooling. S/No. HUF6316031

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.