2578 - Matsuura & Leadwell Vertical Machining Centres previously used by PFW Machining

Engineering

Auction ended on

2017-04-27 15:00:00.0

Time left

Auction finished

Auction description

Please Note: Lot 9 is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Please Note: All other lots are located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Buyer's premium

Buyer's Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing is available by appointment only with the Auctioneer.

Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2017-05-02 17:00:00.0

Final clearance date

2017-05-11 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 26

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
27 Apr 2017 17:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 1: Matsuura Cubex 42 5 Axis Twin Pallet Turning/Milling Machine

Matsuura Cubex 42 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 20000rpm, HSK 63 Spindle Taper, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees Rapid Feed Rates 50m/Min, Maximum Table Speed For Turning 1800rpm, 120 Station ATC,Pallet Diameter 300mm, Maximum Component Size H=350mm D=420mm, 40 Bar Through Spindle Coolant, FSE Filtration System, Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Filtermist FX5000 Fume Extractor, Swarf Bin, 2 Spare Pallets (Fixtures Not Included) S/No 18009 (3/2009)

Please Note: This Machine has had a new spindle end of 2016

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, ...

Preview image
Ends:
27 Apr 2017 17:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2: Matsuura Cubex 25 5 Axis Twin Pallet Turning/Milling Machine

Matsuura Cubex 25 5 Axis Vertical Twin Pallet Turning/Milling Machining Centre with G-Tech 840 Di Control, Maximum Spindle Speed 15000rpm, HSK 63 Spindle Taper, Axis Travels X=550mm Y=410mm Z=450mm B=220 Degrees (-110/+110) C 360 Degrees, Maximum Table Speed For Turning 3000rpm, Rapid Feedrates 50m/Min 150 Station ATC, FSE Filtration System 40 Bar Through Spindle Coolant, Filtermist FX4000 Fume Extraction, Pallet Diameter 130mm, Maximum Component Size D=250mm H=250mm, Renishaw Probe Interface, Tool Presetter, Swarf Conveyor, Swarf Bin, Aproximately 12 Additional Pallets. S/No 17777 (7/2008)

Please Note: New spindle 2 years ago

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading ...

Preview image
Ends:
27 Apr 2017 17:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 3: Matsuura MAM 72-63V Twin Pallet Vertical Machining Centre

Matsuura MAM 72-63V Twin Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 12000rpm, BT40 Big Plus Spindle, Axis Travels X=760mm Y=845mm Z=610mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/Min, Pallet Dimensions 500mm x 500mm, 240 Station ATC, Thgrough Spindle Coolant, FSE Filtration System with Coolant Chiller, FSE MMS Fume Extraction Unit, Renishaw Probe Interface, Renishaw Laser Tool Presetter, 2 Additional Pallets, Swarf Conveyor, Swarf Bin. S/No 16688 (7/2006)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 4: Matsuura MAM72-42V 5 Pallet Vertical Machining Centre

Matsuura MAM 72-42V 5 Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 15000rpm, BT40 Big Plus Spindle, Axis Travels X=520mm Y=730mm Z=510mm A=120 Degrees (-110/+10) C=360 Degrees, Rapid Feed Rates 50m/Min, Pallet Dimensions 300mm x 300mm, 120 Station ATC, Through Spindle Coolant, FSE Coolant Filtation System, Filtermist FX5000 Fume Extractor, Renishaw Laser Tool Presetter, Renishaw Probe Interface, Swarf Conveyor, Swarf Bin.  S/No. 18025 (4/2009)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 5: Matsuura MAM 72-35V 32 Pallet Vertical Machining Centre

Matsuura MAM 72-35V 32 Pallet Vertical Machining Centre with Matsuura G-Tech 30i Control, Maximum Spindle Speed 15000rpm, BT40 Big Plus Spindle, Axis Travels X=680mm Y=385mm Z=625mm B=170 Degrees (-105/+65) C=360 Degrees, Rapid Feedrates 40m/Min, Pallet Diameter 130mm, 120 Station ATC, Renishaw NC4 Tool Presetter, Renishaw Probe Interface, Through Spindle Coolant, FSE Coolant Filtation System, Filtermist FX4000 Fume Extractor, Swarf Conveyor, Swarf Bin.  S/No 18014 (3/2009)

Please Note: This Item is located in Nuneaton, Warwickshire.Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 15:20:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 6: Leadwell V40 Vertical Machining Centre

Leadwell V40 Vertical Machining Centre with Heidenhain 426/430ME Control, Maximum Spindle Speed 8000rpm, BT40 Spindle Taper, Axis travels X=1020mm Y=465mm Z=610mm, Table Dimensions 500mm x 1200mm, 24 station ATC, Swarf Conveyor, Swarf Bin. S/No. L2TJJ1082 (7/2001)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 7: Seco 15 Easy Shrink Tooling Machine

Secos Easy Shrink 15 ZFM08IN. S/No. Q11-1006 (2011)

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 8: Nikken E450 Tool Presetter

Niken E450 Tool Presetter with ISO 40 Holder and HSK63 Holder. S/No. 3086 (6/2004)

Please Note: This Item is located in Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Preview image
Ends:
27 Apr 2017 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 9: Schunk Tribos, Polygonal Tool Clamping System

Schunk Tribos, Polygonal Tool Clamping System

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Preview image
Ends:
27 Apr 2017 15:20:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 10: 50 HSK63 Tool Holders

50 HSK63 Tool Holders

Please Note: Racks are not included

Please Note: This Item is located in Nuneaton, Warwickshire. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories