2412 - Engineering and Fabrication Machinery Formerly Used by Anlyn Engineering Limited

Engineering

Auction ended on

2015-07-28 15:00:00.0

Time left

Auction finished

Auction description

Location:- These Items are located in Cannock, Cheshire, Sheffield and West Midlands

Please Note: Lot 2B Leadwell V-40L Vertical Machining Centre must be collected on Friday 7th Aug 2015    

 

Buyer's premium

Buyer's Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2015-07-30 17:00:00.0

Final clearance date

2015-08-13 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 65

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
28 Jul 2015 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 1: Mazak Type 15/40 CNC Vertical Machining Centre with Mazatrol M-32 Control

Mazak Type 15/40 CNC Vertical Machining Centre with Mazatrol M-32 Control, Table Size 900mm x 400mm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2: Mazak Type 15/40 CNC Vertical Machining Centre with Mazatrol M-2 Control

Mazak Type 15/40 CNC Vertical Machining Centre with Mazatrol M-2 Control, Table Size 900mm x 400mm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:30:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2a: XYZ 5000 CNC Bedmill with Proto Trak A.G.E 3 Control

XYZ 5000 CNC Bedmill (Plated as 4000) with Proto Trak A.G.E 3 Control, Table size 1930mm x 355mm, Long Travel (X axis) 1524mm, Cross Travel (Y Axis) 596mm, Vertical Travel (Z axis) 584mm, Spindle 40ISO with 70 – 3600rpm, Main Motor 7.5Kw

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2b: Leadwell V-40L Vertical Machining Centre with Fanuc Oi-MD Control

Leadwell V-40L Vertical Machining Centre with Fanuc Oi-MD Control, Table Size 1120mm x 610mm, X = 1020mm, Y = 635mm, Z = 610mm, 24-Position ATC, 12,000 RPM Spindle, No.40 Spindle Taper, Max Height under spindle 710mm, Cutting time: 48hrs 38mins 49 secs. S/No. L2TACO321 (2015)

Please Note: This Item is located in Cannock.

The purchaser of this machine must remove it from site on Friday 7th August 2015. There will be a loading charge of £400 + VAT to load this machine to a suitable vehicle which will be added to your invoice. (please contact the Auctioneer for further details)

Preview image
Ends:
28 Jul 2015 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2c: Hurco VM1 Vertical Machining Centre with Max Control

Hurco VM1 Vertical Machining Centre with Max CNC Control, 750mm x 350mm Table, 20 ATC, BT30 Spindle, 20,000 RPM Spindle, Spindle Chiller (2006)

Please Note: This machine is located in the West Midlands and will be loaded free of charge to a suitable vehicle. Blocking & Securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:30:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 3: Harrison Type VS450 CNC Centre Lathe with Fanuc OT Control

Harrison Type VS450 CNC Centre Lathe with Fanuc OT Control, Swing Over Bed 19", Distance Between Centres 60", Indexing Toolpost, 16" 4 Jaw Chuck.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 4: SDMO Type J200K Diesel Generator

SDMO Type J200K Diesel Generator, 200KVA, Sound Pressure 95 dB with Titan 2000 Litre Diesel Tank (2007)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 5: Webster & Benett 36" Vertical Boring Machine

Webster & Benett 36" Vertical Boring Machine, Table Size 36", Max Swing 42", Table to Underside of Ram 19".

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 6: Pearson Model 10.5 Hydraulic Guillotine

Pearson Model 10.5 Hydraulic Guillotine, Capacity 10' x ½", Power Back Guage. 120" Squaring Arm, Front Supports. Model No. 4017

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
28 Jul 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 7: Keetona Powered Guillotine

Keetona Powered Guillotine, Capacity 8" x 1/8", Manual Back Gauge

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories