2375 - Conventional & Fabrication Equipment formerly used by Precision Engineering Services & Others - Phase 2

Engineering

Auction ended on

2015-03-31 15:00:00.0

Time left

Auction finished

Auction description

Location:- These Items are located in Birmingham, Cheshire, Sheffield, Shropshire & Stockport. Please see individual lots for loading information.

 

Buyer's premium

Buyer's Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2015-04-02 17:00:00.0

Final clearance date

2015-04-16 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 66

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
31 Mar 2015 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 1: XYZ SMX 4000 CNC Bed Mill

XYZ SMX 4000 CNC Bed Mill with Prototrak SMX Control, Table 58" x 14", Spindle 40 ISO. Speeds 40-5000 rpm, X Axis 1016mm, Y Axis 596mm, Z Axis 540mm, Quill Travel 140mm, Max Table Load 850kg.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 2: XYZ SMX 2000 3 Axis CNC Turret Mill with Prototrak SMX3 Control

XYZ SMX 2000 3 Axis CNC Turret Mill with Prototrak SMX3 Control, Table Size 1270 x 254mm, X axis 750mm, Y axis 380mm, Z axis 110mm, Spindle Taper R8, Spindle Speeds 74 - 4200 rpm, Power Rise & Fall Knee, Power Drawbar (2006)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 3: Amada Promecam Model APX 50.20 Hydraulic Upstroking Press Brake

Amada Promecam Model APX 50.20 Hydraulic Upstroking Press Brake, Tonnage 50 Tonnes, Max Bend Length 2085 mm, Stroke Length 100mm, Approach Speed 73mm/sec, Bending Speed 13mm/sec, Light guards, Operateur Control type Delem EMA or OP2, Backgauge Travel 0-600 mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 3a: Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake

Promecam Type RG 2400-80 Hydraulic Upstroking Press Brake, Distance Between Side Frames 2150mm, Throat Depth 400mm, Length of Stroke 100mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 3b: Mantech Premium W67K 160/320, 160 T x 32.m Hydraulic Down Stroking Press Brake

Mantech Premium W67K 160/320, 160 T x 32.m Hydraulic Down Stroking Press Brake with D A 41 2 Axis Control, Keli Light Curtain, Top and Bottom Tooling. S/No. 267750 (2013)

Please Note: This Item is located in Shropshire and Unfortunately there are no loading facilities at this site. Dismantling and loading will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 15:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 4: Jones & Shipman Type 1305 EIU Universal Cylindrical Grinder

Jones & Shipman Type 1305 EIU Universal Cylindrical Grinder with Raised Centre Height, Swing Over Bed 14", Between Centres 40", Table Adjustment 17 Degrees, C/W Internal Spindle, 3 Jaw Chuck 4 Jaw Chuck, Face Plate 3 point Steady, Workhead Speeds 40-320 rpm, Wheel Speeds 1750 & 2300 rpm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 6: XYZ PRO SLV 3000 CNC Turret Milling Machine with Prototrak Age 2 Control

XYZ PRO SLV 3000 CNC Turret Milling Machine with Prototrak Age 2 Control, Table 58" x 12", Longitudinal 40", Cross Traverse 17", Spindle Taper 40 INT, Spindle Speeds 70 to 3600 Variable, Power Draw Bar, Auto Lubrication.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 8: Ajax Erlo Type BSER 25/3/L 3 Spindle In Line Drilling Machine

Ajax Erlo Type BSER 25/3/L 3 Spindle In Line Drilling Machine, Type Of Drilling Heads BSE-25, Spindle 3 Morse Taper, Spindle Speeds 32 - 1530, All Spindles Forward and Reverse, One Spindle With Tapping, Tee Slotted Table 45" x 15", Throat 10", Max Daylight 22"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 9: Dean Smith & Grace Type 2415 X 110 Gap Bed Centre Lathe

Dean Smith & Grace Type 2415 X 110 Gap Bed Centre Lathe, Swing Over Bed 24", Swing Over Gap 32", Between Centres 110", Spindle Bore 3 5/8", Spindle Speeds 8 to 900 rpm, 3 Jaw Chuck 4 Jaw Chuck, Quick Change Tool Post

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
31 Mar 2015 15:20:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 10: Colchester Mascot 1600 Gap Bed Centre Lathe

Colchester Mascot 1600 Gap Bed Centre Lathe, Swing Over Bed 17", Swing In Gap 26", Distance Between Centres 60", Spindle Bore 3", Spindle Speeds 20-1600 rpm, 3 Jaw Chuck, 4 Way Tool Post.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories