2350 - Final Meister Auction Consisting of Engineering Ancillaries, Inspection & General Workshop, Assembly Equipment & Office Equipment previously used in an Outstanding Ultra High Precision Machining Facility at Meister Benelux, Belgium without reserve

Engineering

Auction ended on

2014-10-30 13:00:00.0

Time left

Auction finished

Auction description

Location: These Items are located in Sprimont, Belgium

The Items in this auction are for sale without reserve

Auction is held at 13:00 (UK Time) - 14:00 (CET Time)

 

A sole contractor has been appointed to disconnect and load for many items in this auction - please see full details in the 'specific conditions' under the notice to purchasers section

Please Note: Loading prices are mandatory for particular lots - Please take these prices into consideration when bidding.

Sole Contractor contact Information:
DDM Belgium N.V
Geleenlaan 24, B-3600 Genk, Belgium
Tel: + 32 89 32 00 32            Mobile: + 32 474 93 02 51                Fax: + 32 89 32 00 30
Email: joris.beens@ddm.eu     Website: www.ddm.eu 

 

In case of a self pick up please contact Andreas Liebmann;

Tel: + 49 16 36 79 38 58
Email: Aliebmann@hilcoglobal.com

 

VAT Reverse Charges apply to this auction

This Auction is being held in association with Hilco Industrial Acquisitions BV - Amsterdam whom the purchaser will receive an invoice from

Buyer's premium

Buyer's Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 0.00%.

Viewing times

Viewing is available by appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2014-11-03 17:00:00.0

Final clearance date

2014-11-27 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 110

Bidding will be extended on individual lots if bids are placed within 0-10 minutes of the item's end time.
Preview image
Ends:
30 Oct 2014 13:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 38: Schaublin 102 CNC Platern Lathe with Siemens Control

Schaublin 102 CNC Platern Lathe with Siemens Control. S/No. 330506

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €590, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Ends:
30 Oct 2014 13:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 40: Kadia TPH60/250T 15-Station Honing Machine with Unipos UCP1000 Control

Kadia TPH60/250T 15-Station Honing Machine with Unipos UCP1000 Control. S/No. 50/1884 (2001), (5) Vertical Main, (8) Small Vertical, (2) 4-Station Drills, (2) Small Horizontal, Round Track Feed, Bowl Feed, Pick & Place Robot, Nedermann Mist Extractor

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €3305, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Ends:
30 Oct 2014 13:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 41: Kadia 4PH60/250T 11-Station Honing Machine with Unipos UCP1000 Control

Kadia 4PH60/250T 11-Station Honing Machine with Unipos UCP1000 Control. S/No. 50/1825, (4) Vertical Hones (main), (2) Small Horizontal, (1) 4-Station Drill, (6) Small Vertical, Bowl Feed, Pick & Place Robot, Track through Feed, Nedermann Mist Extractor (1999)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €2905, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Ends:
30 Oct 2014 13:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 63: Schaublin 120-TO Lathe

Schaublin 120-TO Lathe. S/No. 181

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €250, Please Note this price does not include packing or strapping - This is at the responsibility of the buyer. This can be done by DDM at extra cost if required

Preview image
Ends:
30 Oct 2014 13:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 65: Triumph Pedestal Drill

Triumph Pedestal Drill

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €100, Please Note this price does not include packing or strapping - This is at the responsibility of the buyer. This can be done by DDM at extra cost if required

This Item can also be picked up by the buyer themselves on site in Sprimont however the Buyer has to ensure they have the relevant insurance policies in place and meets with all the Health & Safety criteria, provide the correct equipment to do so and man power if needed for the pickup

 

Preview image
Ends:
30 Oct 2014 13:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 68: Nederman Extractor

Nederman Extractor. S/No. 663 603263

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €100, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

Preview image
Ends:
30 Oct 2014 13:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 73: Loc Electric Manuloc 27 Pedestrian Pallet Truck

Loc Electric Manuloc 27 Pedestrian Pallet Truck. S/No. 29314 (1992)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €150, Please Note this price does not include packing or strapping - This is at the responsibility of the buyer. This can be done by DDM at extra cost if required

This Item can also be picked up by the buyer themselves on site in Sprimont however the Buyer has to ensure they have the relevant insurance policies in place and meets with all the Health & Safety criteria, provide the correct equipment to do so and man power if needed for the pickup
 

Preview image
Ends:
30 Oct 2014 13:10:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 76: Loc Electric Type Euroloc EU-130-FR-560 Pedestrian Pallet Truck

Loc Electric Type Euroloc EU-130-FR-560 Pedestrian Pallet Truck. S/No. 80587 (AL) (1999)

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting and loading this item to a suitable vehicle is €150, Please Note this price does not include packing or strapping - This is at the responsibility of the buyer. This can be done by DDM at extra cost if required

This Item can also be picked up by the buyer themselves on site in Sprimont however the Buyer has to ensure they have the relevant insurance policies in place and meets with all the Health & Safety criteria, provide the correct equipment to do so and man power if needed for the pickup
 

Preview image
Ends:
30 Oct 2014 13:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 102: Arbour Press

Arbour Press

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €65, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

This Item can also be picked up by the buyer themselves on site in Sprimont however the Buyer has to ensure they have the relevant insurance policies in place and meets with all the Health & Safety criteria, provide the correct equipment to do so and man power if needed for the pickup
 

Preview image
Ends:
30 Oct 2014 13:10:00 GMT
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
0.00%

Lot 108: Kef 120mm Double Ended Grinder

Kef 120mm Double Ended Grinder

Please Note: This Item is located in Sprimont, Belgium

Please Note: The Fee for disconnecting  and loading this item to a suitable vehicle is €85, please note this price does not include packing or strapping - this is at the responsibility of the buyer.  This can be done by DDM at extra cost if required

This Item can also be picked up by the buyer themselves on site in Sprimont however the Buyer has to ensure they have the relevant insurance policies in place and meets with all the Health & Safety criteria, provide the correct equipment to do so and man power if needed for the pickup
 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories