2343- CNC & Conventional Machinery no longer required due to reinvestment at DFG Manufacturing & Others, Phase 2

Engineering

Auction ended on

2014-10-23 15:00:00.0

Time left

Auction finished

Auction description

Location: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Buyer's premium

Buyer's Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2014-10-27 17:00:00.0

Final clearance date

2014-11-06 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 61

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
23 Oct 2014 16:40:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 100: Hitachi Seiki Type VA40 Vertical Machining Centre

Hitachi Seiki Type VA40 Vertical Machining Centre with Fanuc 6M Control, Table Size 1250mm x 450mm.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 101: Bridgeport Type BPC 520 VOM Vertical Machining Centre with GE Fanuc OM Control

Bridgeport Type BPC 520 VOM Vertical Machining Centre with GE Fanuc OM Control, Table Size 800mm x 380mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:30:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 101a: Webster Bennett 36" M Type Vertical Borer

Webster Bennett 36" M Type Vertical Borer, Table Size 36". Maximum Swing on Table 48", Maximum Daylight 26", Speeds 13.5 to 300rpm, Screw Cutting & Gears

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 16:40:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 102: Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control

Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Swing Over Bed 600mm. Distance Between Centres 2000mm. 8 Station Indexing Tool Post. Spindle Bore 110mm. 400mm 3 Jaw Chuck. (2005)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 103: Ajax Premier Type 260 CNC Gap Bed Centre Lathe with Fagor Control

Ajax Premier Type 260 CNC Gap Bed Centre Lathe with Fagor Control, 3-Point Steady, 12" 3 Jaw Chuck, Swing over Bed 540mm, Swing in Gap 740mm, Between Centres 1600mm Spindle Bore 80mm, Speeds 0-1700rpm with Front & Rear Quick Change Toolpost

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:50:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 103a: Mazak Quick Turn 8 CNC Lathe with Bar Feed

Mazak Quick Turn 8 CNC Lathe with Bar Feed, Mazatrol Cam T-2 Control, Standard Cutting Diameter 100mm, Maximum Cutting Diameter 160mm, Maximum Bar Material Cutting 32mm, Maximum Length of Work 250mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:40:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 104: XYZ Mini Mill 560 Vertical Machining Centre

XYZ Mini Mill 560 Vertical Machining Centre, X Travel 560mm. Y Travel 400mm. Z Travel 500mm. Table Size 610 x 370mm. Spindle Centre To Column 455mm. Spindle To Table 100 - 600mm. Spindle Taper BT40. Spindle Speeds 5-8000rpm. Auto Tool Changer 16 Station. Siemens Sinumerik 810D/840D CNC Control (2006)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 16:10:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 104a: XYZ 4000 CNC Bed Mill with ProtoTrak MX2 Control

XYZ 4000 CNC Bed Mill with ProtoTrak MX2 Control, Table Size 58" x 14". X Axis 40", Y Axis 20", Head Travel 23", Spindle Taper 40 ISO, Spindle Speeds 70-3600rpm, Power Draw Bar (1996)

Please note: This machine needs attention

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 15:00:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 105: Joemars Model JM325DZ Small Hole Electrical Discharge Machine

Joemars Model JM325DZ Small Hole Electrical Discharge Machine with Carmar SW 5000 Fuzzy Control, Table Size 460mm x 210mm, X & Y Travel 330mm x 200mm, Ram Servo Travel 345mm, Max Electrode Length 400mm, Electrode Size 0.3mm - 3mm. Max Peak Current 38A, Peak Current Settings - 15 Steps 0.3A to 38A (2005)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Preview image
Ends:
23 Oct 2014 16:20:00 BST
Time left:
Bidding ended
Buyer's premium:
16.00%
VAT rate:
20.00%

Lot 106: Abac Model VT30 Rotary Screw Air Compressor

Abac Model VT30 Rotary Screw Air Compressor, Power 22Kw, Pressure 8 Bar, Air Displacement 3.32 M/Min, Cubic Feet Per Minute 120, Noise Level: 72dB (A), Run Hours 56320 (1997)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories