2248B - Stretch Forming, Chemical Etching, Alocrom & Anodising Lines, Heat Treatment and Paint Plants previously used by Aeroform Industries Ltd (previously known as BHW Components Ltd) in the Manufacture of Aerostructures & Aerospace Components

Engineering

Auction ended on

2013-12-03 15:00:00.0

Time left

Auction finished

Auction description

Location: These Items are located in Wigan

Please click here to view a brochure for this auction

Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:

Up until Thursday 19th December 2013

and then from:

6th January 2014 to 31st January 2014

(There will be no clearance on site between 20th December 2013 and 5th January 2014 Inclusive)

 

Buyer's premium

Buyer's Premium will be charged at 15.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing by Appointment only with the Auctioneer, please contact our Office on: + 44 (0) 121 328 2424

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2013-12-05 17:00:00.0

Final clearance date

2014-01-31 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 42

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
03 Dec 2013 17:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 100: Loire 4m Stretch Former

Loire 4m Stretch Former S/No. 88509 (1985) with:-
3m Pit Mount Unit
2-3 axis End Stations/Carriage
1 Axis Centre Form Unit
Bebr Travelling Crane
Loire Fekd 200-400 Hydraulic Push Down Unit (100 Ton)
Control Bench with Sinumerik 840D PLC (2000) S/No. 99106
Advised Capacity 350 Ton (1.2m x 4m 5mm)
All Controls, Associated Services, Change Parts and Tooling

Please Note: These Items are located in Wigan

Preview image
Ends:
03 Dec 2013 17:10:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 101: Sheridan TC1000 Ton Stretch Former

Sheridan TC1000 Ton Stretch Former S/No. 01110 (2002) with:-
7m Pit Mounted Unit
2-4.3m 2 Axis End Stations/Carriages
1- Single Axis Form Station (4.3m)
Control Panel with Siemens Sinumerik 840D Control
Specification: Die Table Stroke: 2.1m, Max Jaw Distance: 6m, Swing: 15-90 Degrees.
All Controls, Associated Services, Change Parts and Tooling.

Please Note: These Items are located in Wigan

Preview image
Ends:
03 Dec 2013 17:20:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 102: TW & CB Sheridan Stretch Forming Machine

TW & CB Sheridan Stretch Forming Machine S/No. 64 with:-
Floor Mounted Unit
2-3 Axis End Stations/Carriage (1.6m)
1 Single Form Station (2m)
Max Thickness 5mm
All Controls, Associated Services, Change Parts and Tooling

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 16:20:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 103: Erco Stretch Form Machine

Erco Stretch Form Machine with:-

500mm Pit Mounted Unit
2-3 Axis End Stations/Carriage (2.5m)
1 Single Axis Form Station (2.5m)
Control Bench, All Controls, Associated Services, Change Parts and Tooling

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 15:40:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 104: Avure QFL 1.1-500 55Mpa Fluid Press

Avure QFL 1.1-500 55Mpa Fluid Press with In-Feed and Out-Feed Work Tables, All Controls, Associated Services, Tooling & Charge Parts. S/No. 100234 (2005)

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 16:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 105: John Shaw & Sons 8000 Ton Capacity 6 Column Vertical Rubber Press

John Shaw & Sons 8000-Ton Capacity 6 Column Vertical Rubber Press , Ref Num 189 with Twin Shuttle Tables (Approx. 3.5’ x 8’), Control Systems, Berry Electrical Control Panel, Hydraulic Systems & Staging

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 16:10:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 107: Farnham Approx 6m (02. Inch Gauge) Rolling Machine

Farnham Approx 6m (02. Inch Gauge) Rolling Machine. Ref No: BHWP262 S/No. 4524

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 15:50:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 108: Hufford A5 Bending Machine

Hufford A5 Bending Machine with Hydraulic Power Pack. Reference No. BHWP248. S/No. 29

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 15:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 109: Hufford A10 Bending Machine

Hufford A10 Bending Machine with Hydraulic Power Pack, Reference No. 6, S/No. 70

Please Note: This Item is located in Wigan

Preview image
Ends:
03 Dec 2013 15:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
15.00%
VAT rate:
20.00%

Lot 110: Hufford Bending Machine

Hufford Bending Machine with Hydraulic Power Pack, Reference No. BHWP361

Please Note: This Item is located in Wigan

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories