2176 - CNC Lathes and Machining Centres no longer required by Component Supplies Ltd & Others

Mazak H-400 Twin Pallet Horizontal Machining Centre with Mazatrol M-32 Control, Twin 400 x 400mm Pallets, 1 degree Indexing, 30 ATC, Coolant. S/No. 76484 (1989)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Chiron FZ 12W High Speed Machining Centre with Fanuc OM Control, 650 x 350mm Indexable Table with Knoll Swarf Conveyor. S/No. 181-76 (1995)

Please Note: Some of the Tool Change Positions on this machine require Attention

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Gildemeister Sprint 32 Linear Twin Spindle, 6 & 2 Axis Turning Centre with Fanuc Series 160i-B Control, Max. Turning Diameter: 33mm, Max. Turning Length: 120mm, C and Y Axis to left & right hand spindles, 8,000rpm max. Spindle Speed to both Spindles, (3) Driven Tool Positions to left hand Spindle, Driven Tool Facility to Right Hand Spindle, Parts Catcher, High Pressure Coolant, Swarf Conveyor & Iemca Boss Magazine Barfeed. S/No. 2301-0145 (2003)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Daewoo Puma 1500Y 4 axis Turning Centre with Fanuc 18i-T Control, Max Swing 599mm, Max Turning dia 350mm, 550mm Machining length, 45mm Bar capacity, C-Axis, Y-Axis Travel 100mm, Spindle Speeds 60-6000rpm, 12-Station Turret with Driven Tools, Tailstock MT No.5 Equipped with FMB SL90L Magazine Bar Feed, 3-Jaw Chuck, Collet Chuck, Standard and Driven Tools, Tool Setter, Parts Catcher and Swarf conveyor. S/No. P1500Y0022 (2002)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Doosan NM510 Vertical Machining Centre with Fanuc Series Oi-MC Control, 4 ^th Axis Interface, Table Size: 1200 x 500mm, 12,000rpm BT40 Spindle, X = 1020mm, Y = 510mm, Z = 625mm, 30-Station ATC, Through Spindle Coolant, Swarf Conveyor. S/No. NM5100447 (2008))

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Hitachi Seiki HiTurn 250 2-Axis CNC Lathe with Seicos PC Flexi Control, Max Swing 680mm, Max Turning Dia 500mm, Max machining length 500mm, Spindle Speeds 42-42000rpm, 12-Station Turret, Programmable Tailstock. S/No. ST20027E (2002)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Citizen M32 Sliding Head Turning Centre with Cincom Control, Main Spindle Turning Dia 32mm, Sub-spindle turning dia 32mm, Max Machining Length 250mm, 4 x Platen Turning Tools, 4 x Platen Cross Driven Tools, 3 x Front End Work Tools (Toolpost) 3 x Back end Work Tools, 10-Station Turret with Driven Tools (Up to 40 Mountable Tools) Main Spindle Speed 8000rpm, Sub-spindle Speed 7000rpm, Driven Tool Speed 5000rpm. Equipped with parts catcher and coolant system. S/No. P12193 (2000)

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Bridgeport VMC800/22 Vertical Machining Centre with Heidenhain 426 Control, 1000 x 490mm Table, X = 800mm, Y = 510mm, Z = 500mm, 22 ATC. S/No. 21057 (06/1996)

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Mazak Multiplex 6200 Twin Spindle 3-Axis Turning Centre with Mazatrol T-Plus Control, Max Swing 320mm, Max Turning Dia 210mm, Max Turning Length 350mm, Bar Capacity 52mm, C-axis 360.000 deg, Spindle Speeds 35-5000rpm, 2 x 12-Station Turrets with Driven Tools. Equipped with 3-Jaw Chucks, Standard and Driven Tools and Swarf Conveyor. S/No. 135538 (1998)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

Mazak VTC-20C 3 Axis Vertical Machining Centre with Mazatrol M-Plus Control, Table 2000 x 510mm, X=1660mm, Y=510mm, Z=510mm, BT/CAT40 Spindle Taper, 40-7000rpm, (2) 24-Station  Tool Carousels (48 Tools in Total), Central Partition for Pendulum Milling.

Location: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser